997s geometry settings
Discussion
my 997 s cab is with opc currently having the geometry set up.the standard set up has an element of understeer i would like to have toned down.
whilst operating within the manufacturer's prescribed settings, is it possible to alter the set up? if so does anyone know what they should be.
nb.the car has 19 inch wheels although i am not sure whether this makes any difference.
any assistance would be appreciated
thanks
whilst operating within the manufacturer's prescribed settings, is it possible to alter the set up? if so does anyone know what they should be.
nb.the car has 19 inch wheels although i am not sure whether this makes any difference.
any assistance would be appreciated
thanks
I would be surprised if an OPC will agree to do anything other than standard factory setup.
If they do agree, they should know what settings to apply.
For reference you basically increase negative camber front and rear by approx 1 to 2 degrees and increase rear toe in.
For this job, best bet is to take the car to JZ Machtech, Parr or Fearnsport and ask for a fast road/track setup as applicable.
If they do agree, they should know what settings to apply.
For reference you basically increase negative camber front and rear by approx 1 to 2 degrees and increase rear toe in.
For this job, best bet is to take the car to JZ Machtech, Parr or Fearnsport and ask for a fast road/track setup as applicable.
Gassing Station | Porsche General | Top of Page | What's New | My Stuff



