993 rust bubble on Cill
993 rust bubble on Cill
Author
Discussion

finmac

Original Poster:

1,712 posts

269 months

Wednesday 14th November 2007
quotequote all
Looked at an early 993 recently which had some decent sized rust bubbles on the cill, just under the door catch (at the bottom of the main pillar, where it turns and merges with the cill). Area was 50p piece sized. Car did not appear to have accident damage in this area but had been used in a damp area for a number of years.

Thoughts/anyone else experienced this?

(These cars are getting on a bit now at 13 years and I guess corrosion is a fact of life)

r5gttgaz

7,897 posts

251 months

Wednesday 14th November 2007
quotequote all
Seatbelt buckle trapped when closing door?

dilbert

7,741 posts

262 months

Wednesday 14th November 2007
quotequote all
And what would e be sayin!
Damp barn wuz it sur?
Aye tell eeee, these threads be gettin' more contryved!
hehe

Edited to add;

I should think the kidney bowls are rotten.

Edited by dilbert on Wednesday 14th November 19:46

9hellheaven

1,595 posts

240 months

Wednesday 14th November 2007
quotequote all
If its metal its rusts..just a matter of when!

finmac

Original Poster:

1,712 posts

269 months

Thursday 15th November 2007
quotequote all
Kidney Bowls rotten.... surely you exagerate! It is remember a 993 of 13 years vintage... could the cills /kidney bowls really be rotten that soon??

Edited by finmac on Thursday 15th November 17:39

dilbert

7,741 posts

262 months

Thursday 15th November 2007
quotequote all
finmac said:
Kidney Bowls rotten.... explain please?
I don't know so much about the 993, but I doubt it's that much different from the 911 shell. Theres an area in front of the rear wheel that's very difficult to clean, and it will always tend to be a rot trap.

On a 911 there are some strenghtening panels that look like kidney shaped bowls, before they're welded to the sides of the chassis, behind the door shuts.

finmac

Original Poster:

1,712 posts

269 months

Thursday 15th November 2007
quotequote all
dilbert said:
finmac said:
Kidney Bowls rotten.... explain please?
I don't know so much about the 993, but I doubt it's that much different from the 911 shell. Theres an area in front of the rear wheel that's very difficult to clean, and it will always tend to be a rot trap.

On a 911 there are some strenghtening panels that look like kidney shaped bowls, before they're welded to the sides of the chassis, behind the door shuts.
Thanks

Has anyone ever heard of rotten cills/kidney bowls on a 993??

dilbert

7,741 posts

262 months

Thursday 15th November 2007
quotequote all
finmac said:
dilbert said:
finmac said:
Kidney Bowls rotten.... explain please?
I don't know so much about the 993, but I doubt it's that much different from the 911 shell. Theres an area in front of the rear wheel that's very difficult to clean, and it will always tend to be a rot trap.

On a 911 there are some strenghtening panels that look like kidney shaped bowls, before they're welded to the sides of the chassis, behind the door shuts.
Thanks

Has anyone ever heard of rotten cills/kidney bowls on a 993??
Well you have, because you said you've seen them. Metal sheet just doesn't rust one side, and not the other.

finmac

Original Poster:

1,712 posts

269 months

Thursday 15th November 2007
quotequote all
Yea, fair enough, I have seen a small patch of rust the size of a 50P. I guess the question is did the rust come from the outside in or the inside out!

Any idea what kind of rust protection there is in the cill area on the 993? i.e. Galvanised steel and/or some kind of Waxoyl type treatment or what?

Pickled Piper

6,452 posts

266 months

Thursday 15th November 2007
quotequote all
I viewed a 993 when I was looking for mine. It had what looked like the start of a rust bubble in the same area. It looked like surface rust rather than the sill was rusting from the inside out. It's the only time I have ever seen it. I did post on PH at the time asking if it was a common problem. No one had had come across it. Until reading your post I have never seen a reference to it.

pp

finmac

Original Poster:

1,712 posts

269 months

Thursday 15th November 2007
quotequote all
Pickled Piper said:
I viewed a 993 when I was looking for mine. It had what looked like the start of a rust bubble in the same area. It looked like surface rust rather than the sill was rusting from the inside out. It's the only time I have ever seen it. I did post on PH at the time asking if it was a common problem. No one had had come across it. Until reading your post I have never seen a reference to it.

pp
Interestng was that recently and had the car been driven year round? i.e. salty roads etc?

dilbert

7,741 posts

262 months

Thursday 15th November 2007
quotequote all
finmac said:
Yea, fair enough, I have seen a small patch of rust the size of a 50P. I guess the question is did the rust come from the outside in or the inside out!

Any idea what kind of rust protection there is in the cill area on the 993? i.e. Galvanised steel and/or some kind of Waxoyl type treatment or what?
Well I suppose it depends on the details, but I can say that surface rust (under paint) is quite rare!

Pickled Piper

6,452 posts

266 months

Thursday 15th November 2007
quotequote all
finmac said:
Pickled Piper said:
I viewed a 993 when I was looking for mine. It had what looked like the start of a rust bubble in the same area. It looked like surface rust rather than the sill was rusting from the inside out. It's the only time I have ever seen it. I did post on PH at the time asking if it was a common problem. No one had had come across it. Until reading your post I have never seen a reference to it.

pp
Interestng was that recently and had the car been driven year round? i.e. salty roads etc?
I viewed the car over three years at a dealer. The car was in immaculate condition and had clearly been looked after. I would have bought it but it didn't have AC. The rust bubble, if you can call it that, was so minor that it wouldn't have prevented me from buying the car if everything else had been right.

pp

phelix

4,684 posts

280 months

Thursday 15th November 2007
quotequote all
dilbert said:
Well you have, because you said you've seen them. Metal sheet just doesn't rust one side, and not the other.
Umm, rust on one side means nothing about whether or not there's rust on the other side; it really depends on the circumstances. Rust can cover an entire panel on one side while the other side is pristine.

The 993 chassis is fully galvanised and rust is quite rare except if there's been a poor repair and/or damage exposing bare metal. I think targas can suffer from manufacturing/design flaws leading to rust wher ethe targa roof joins the main body.

dilbert

7,741 posts

262 months

Thursday 15th November 2007
quotequote all
phelix said:
dilbert said:
Well you have, because you said you've seen them. Metal sheet just doesn't rust one side, and not the other.
Umm, rust on one side means nothing about whether or not there's rust on the other side; it really depends on the circumstances. Rust can cover an entire panel on one side while the other side is pristine.

The 993 chassis is fully galvanised and rust is quite rare except if there's been a poor repair and/or damage exposing bare metal. I think targas can suffer from manufacturing/design flaws leading to rust wher ethe targa roof joins the main body.
Whatever you say.
Tell it to your mechanic in a few years! hehe

911addict

394 posts

249 months

Thursday 15th November 2007
quotequote all
Unfortunately rust becomes more common as our cars get older. Ongoing repairs and maintenance is inevitable. Aircooled cars are at least 10 years old, many 15-20, and even older. I doubt the 996 onward will weather so well.

9hellheaven

1,595 posts

240 months

Friday 16th November 2007
quotequote all
I think some of you guys need to get in the real world..THEY ALL RUST!!!. Depending on how the car has been kept etc the rust process will generaly start at about the 7 year mark, you just wont notice it as it will be in the enclosed areas of the car. Generally inner sills, valances, inside the doors, rubber seals, etc etc. Bubbles and blisters in the paint ARE generally the end result, NOT THE BEGINING.
Its a fact that we live in one of the worse enviroments for a cars well being thats wet and damp, not to mention salty roads etc. Humididy is one of the few bad things we dont get.
The newer models will in fact fair a little better because the treatment process of metal has moved on a lot since the 1990s..the 964/993 were all treated in the same way as cars of the late 70s and 80s. Also greater protection is offered to the newer models through the unsightly but worth while plastic enclosures on the car.
If you want to have sleepless nights get you hands on an endoscope (think thats how you spell it) insert it so to speak and WEEP at what you will all (or most anyway) find!cry

Li Moo Bai

847 posts

236 months

Friday 16th November 2007
quotequote all
A proper cleaning regime is what you need to really stop the rot i think.

galvanisation will probably only slow down the inevitable.

why else would the body guarantee only last 10 years? hey at least that's more than a lot of other manufacturers offer smile