964 wishbones - replace the lot - really???
Discussion
Been advised the front wishbones will need replacing in the future and it appears you change the lot (metal and all). Doesn't seem the most economic way of doing it @ £200 per side + fitting. Any suggestions? (I'm not a DIY'er so please don't go there). Can't someone just replace the rubber bits (of the wishbone!)
Mick
Mick
r5gttgaz said:
Can you polybush them? Mine were done last year but they went down the brand new wishbone route costing £500+
You can, there was an article in one of the mags a few years ago. Bloke called Geoff ex-millbrook iirc had designed a re-bush kit.I think the bush kit was £100. You had to chop the old bushes and metal bush out and replace. If your not diy'ing then I suppose it could've ended up as expensive as new ones.
PO of my car paid about the same (£500) for a new pair fitted from JZM.
Try a search on Rennlist, there may be more details on there.
Rob
You'll find how to change the wishbone bushes on page 2 of this Rennlist thread (ignore the horror story at the start of page one):
http://forums.rennlist.com/rennforums/showthread.p...
DIY is really the only way to save money because I too have been informed that the extra time it takes for a garage to strip out and replace the bushes, brings it up almost to the same price of putting new wishbones in.
I Like Kevin's idea of getting used wishbones and getting them re-bushed ready to go straight on and then re-cycling the old ones. There must be a big stockpile of old wishbones out their somewhere considering so many have been changed
http://forums.rennlist.com/rennforums/showthread.p...
DIY is really the only way to save money because I too have been informed that the extra time it takes for a garage to strip out and replace the bushes, brings it up almost to the same price of putting new wishbones in.
I Like Kevin's idea of getting used wishbones and getting them re-bushed ready to go straight on and then re-cycling the old ones. There must be a big stockpile of old wishbones out their somewhere considering so many have been changed

Thanks lads just got me 64 and this new problem is high lighted....just looking at work previous owner had done in aug..would this have been to resolve a problem.
Wishbone kit....£135
N/S AND O/S drop links (wot are these) (2 per side) £300
Also suspension mounts at £500....wots that all about
Wishbone kit....£135
N/S AND O/S drop links (wot are these) (2 per side) £300
Also suspension mounts at £500....wots that all about
The issue is the price of labour and the same practice is common on 993s. My 993TT just had new front wishbones - the price for restoring the originals once labour is included is comparable with the cost of new, hence a lot of people go for new. If you're a competent DIYer and you're prepared to put in the time and therefore you're not paying for labour then you'll save some cash - depends what's important. Regardless of my DIY skills - I didn't want to spend the whole weekend under the car for the sake of the saving. New ones look nice and shiny too - at least initially....;-)
You could but IMHO the drive would be too direct and twitchy - unless it is only being used on a track and then with some experienced drivers.
The rubber silent blocks are not solid anyway and so there is intended to be some movement but it does get worse and more with age until there is too much.
We choose the same shores hardness of rubber for our bushes - with a slight tolerance to slightly harder (to compenstae for other general wear and slackness increasing with age throughout the system).
Baz
The rubber silent blocks are not solid anyway and so there is intended to be some movement but it does get worse and more with age until there is too much.
We choose the same shores hardness of rubber for our bushes - with a slight tolerance to slightly harder (to compenstae for other general wear and slackness increasing with age throughout the system).
Baz
hartech said:
You could but IMHO the drive would be too direct and twitchy - unless it is only being used on a track and then with some experienced drivers.
The rubber silent blocks are not solid anyway and so there is intended to be some movement but it does get worse and more with age until there is too much.
We choose the same shores hardness of rubber for our bushes - with a slight tolerance to slightly harder (to compenstae for other general wear and slackness increasing with age throughout the system).
Baz
I had polybushes installed when I replaced the wishbones on my 993tt. Didn't notice anymore twitchiness. They'all also last a hell of alot longer than the standard rubber bushes since they resist cracking and normal rot the rubber ones are susceptible to.The rubber silent blocks are not solid anyway and so there is intended to be some movement but it does get worse and more with age until there is too much.
We choose the same shores hardness of rubber for our bushes - with a slight tolerance to slightly harder (to compenstae for other general wear and slackness increasing with age throughout the system).
Baz
Silver993tt said:
hartech said:
You could but IMHO the drive would be too direct and twitchy - unless it is only being used on a track and then with some experienced drivers.
The rubber silent blocks are not solid anyway and so there is intended to be some movement but it does get worse and more with age until there is too much.
We choose the same shores hardness of rubber for our bushes - with a slight tolerance to slightly harder (to compenstae for other general wear and slackness increasing with age throughout the system).
Baz
I had polybushes installed when I replaced the wishbones on my 993tt. Didn't notice anymore twitchiness. They'all also last a hell of alot longer than the standard rubber bushes since they resist cracking and normal rot the rubber ones are susceptible to.The rubber silent blocks are not solid anyway and so there is intended to be some movement but it does get worse and more with age until there is too much.
We choose the same shores hardness of rubber for our bushes - with a slight tolerance to slightly harder (to compenstae for other general wear and slackness increasing with age throughout the system).
Baz
Gassing Station | Porsche General | Top of Page | What's New | My Stuff



are the the adjustable RS ones?