Discussion
I have just bought my first Porsche, a '95 968 CS. Looks really clean and tidy and drives beautifully. It's done 110K miles but has full Porsche or specialist service history.
Anyway - the belts were done about 15K miles (4 years) ago, will they need doing again just due to time?
Also, the cams.... I understand that they can be problematic on 968's. Do they tend to give out at any particular mileage or will good servicing keep them healthy?
I am satisfied that there are no major issues withthe car now, but it's always good to plan for the future!
Final question - what's the thought on depreciation on these cars? Will prices fall much more or have they stabilized?
Many thanks.
Anyway - the belts were done about 15K miles (4 years) ago, will they need doing again just due to time?
Also, the cams.... I understand that they can be problematic on 968's. Do they tend to give out at any particular mileage or will good servicing keep them healthy?
I am satisfied that there are no major issues withthe car now, but it's always good to plan for the future!
Final question - what's the thought on depreciation on these cars? Will prices fall much more or have they stabilized?
Many thanks.
Get the belts changed ASAP for your own piece of mind, you know its done then, only fit genuine belts(don't forget there is a balance shaft belt in there too) and make sure it is by someone who knows how to do this right, now the cam belt has an Aisin hydraulic type tensioner and if done properly the tech will be measuring piston hight on number 1 so it is exactly timed up correctly and for the balance belt they must have a Burrows gauge to tension it, this tension is critical, many people who don't know what they are doing will tension this really tight like a cam belt. It will scream when running, eventually snap taking the cam belt and several valves.
as for cams they do loose teeth on the gears in the centre of the cam, this is the chain drive from one cam to the other, generally this is noticed when work is carried out, not known them jump or cause problems personally.
968! still a great car
as for cams they do loose teeth on the gears in the centre of the cam, this is the chain drive from one cam to the other, generally this is noticed when work is carried out, not known them jump or cause problems personally.
968! still a great car
Many thanks for the response.
Just to be clear, I am certain that the belts have been changed and retensioned by appropriately trained specialists - 911 Virgins if I remember correctly. Therefore I don't want to get the job done again if the service schedule doesn't require it - is there a time limit on the belt changes?
Obviously getting them changed does mean that they ae done for the foreseeable future, however, if not required it is a significant outlay! (Though of course much cheaper than an engine...)
Thanks again.
Just to be clear, I am certain that the belts have been changed and retensioned by appropriately trained specialists - 911 Virgins if I remember correctly. Therefore I don't want to get the job done again if the service schedule doesn't require it - is there a time limit on the belt changes?
Obviously getting them changed does mean that they ae done for the foreseeable future, however, if not required it is a significant outlay! (Though of course much cheaper than an engine...)
Thanks again.
I just got a 968 Sport yesterday. I checked with EMC Motorsport in the Midlands and belts are 40k or 6 years. Rollers need changing at the same time though. You can also try to listen for the chain getting noisy - it's not too dear but a quite involved job to change. If the sprocket teeth are badly worn then you'll need camshafts and that job can cost around £1500.
I think they're reasonably near to you so I'd take it to EMC for a checkover. They know their stuff on these, from racing them themselves and for others and looking after road cars for customers. I'm not affiliated with them, I just know them from racing with/against them (will be seeing them tonight at the PCGB Race Championship awards night actually). I use a different specialist myself based on location (I'm up in Cheshire), but EMC know the front engined cars better.
My guy quoted about £320 for belts and rollers so worth having done for peace of mind (as already said).
I only have a mobile number for Alex, but just got this off Google for you:
EMC Motorsport, Saltley, Birmingham Tel: 0121 328 2225
I think they're reasonably near to you so I'd take it to EMC for a checkover. They know their stuff on these, from racing them themselves and for others and looking after road cars for customers. I'm not affiliated with them, I just know them from racing with/against them (will be seeing them tonight at the PCGB Race Championship awards night actually). I use a different specialist myself based on location (I'm up in Cheshire), but EMC know the front engined cars better.
My guy quoted about £320 for belts and rollers so worth having done for peace of mind (as already said).
I only have a mobile number for Alex, but just got this off Google for you:
EMC Motorsport, Saltley, Birmingham Tel: 0121 328 2225
I will concur... EMC know there stuff with the front engine Porsches.
there a few of the guys ( me included ) over on www.968uk.co.uk that have used them for work on 968's and 944's.
If you havent already joined the forum over there come and say hello!
there a few of the guys ( me included ) over on www.968uk.co.uk that have used them for work on 968's and 944's.
If you havent already joined the forum over there come and say hello!
Hartech are able to measure teeth wear on the cams, might be worth speaking to them. They were replaced on my car at around 116K I think.
You could tell they were gone by a chattering sound near the variocam unit. Took it to JZ Mactech (werent cheap but did a cracking job) and they diagnosed it straight away. Said they had never seen a cam chain so stretched.
Cost a fortune but it was soooo much better after.
You could tell they were gone by a chattering sound near the variocam unit. Took it to JZ Mactech (werent cheap but did a cracking job) and they diagnosed it straight away. Said they had never seen a cam chain so stretched.
Cost a fortune but it was soooo much better after.
Gassing Station | Porsche General | Top of Page | What's New | My Stuff



