993 Alarm Problem - Help!
993 Alarm Problem - Help!
Author
Discussion

Porschetastic

Original Poster:

187 posts

278 months

Saturday 17th November 2007
quotequote all
Pulling my hair out as I cannot get my baby to start!

In typical winter style, my battery went flat and the remote wouldn't work. Charged the battery, but now the alarm won't switch off. Basically, the only way I can get into the car is with the key as the remote has no impact.

Tried searching on the web and followed the suggestions on Rennlist, but to no avail - switched on the ignition after 10 secs but the remote still didn't work; switched the ignition on and off twice, but this didn't work either.

HELP!!!

Porsche Tech

102 posts

232 months

Saturday 17th November 2007
quotequote all
has it been running and the alarm functioning ok recently, try new battery in fob, failing that new mother board in the alarm or new fob if you have the master red fob, is it a PA 1000 or PA 200

Porschetastic

Original Poster:

187 posts

278 months

Sunday 18th November 2007
quotequote all
Porsche Tech,

Yes it has been running ok recently and the alarm has also been working fine. It is a PA 2000. Seems weird that the alarm should go pear shaped just when the battery goes flat......

Any more help would be greatly appreciated.

Dave

phelix

4,684 posts

280 months

Sunday 18th November 2007
quotequote all
Do you have a small additional key that can be used to turn the alarm off? Some cars seem to have a key operated switch located under the driver's seat.

A call to Hamilton and Palmer tomorrow might be in order if you have no luck. And has trying the seconf fob helped?

phelix

4,684 posts

280 months

Sunday 18th November 2007
quotequote all
And you can ignore most of the Rennlist advice as the PA 2000 alarm is unique to the UK; most 993's outside of the UK have the factory alarm and drive block system which is quite different.

Porschetastic

Original Poster:

187 posts

278 months

Sunday 18th November 2007
quotequote all
Phelix,

Unfortunately I don't have the little key as it never came with the car when I bought it. Have tried the other fob but no joy!

This is a nightmare - we are knocking the house down on Wednesday so I must get the Porker out of the drive before then frown

Will try Hamilton & Palmer tomorrow if Porsche GB can't help.

Thanks,

Dave

phelix

4,684 posts

280 months

Sunday 18th November 2007
quotequote all
Try H&P first; from other people's experiences on here they seem to have excellent customer service on a product they sold more than 10 years ago which, sadly, is more than can generally said about Porsche dealers.

Duncanf20

139 posts

254 months

Monday 19th November 2007
quotequote all
H&P were very helpful with replacing both alarm fobs & recoding my pa2000 a few weeks when I had the keys stolen. Seem to remember that the guy that does the Porsche work is only there a couple of days a week though.

Might be of no help but on my other car when you disconnect the battery the fobs won't work either. You have to press the unlock (or is it lock?) button 5 times to re-synchronise. In a similar vein for the alarm in my old VW golf you had to press and hold one of the buttons for 5 seconds or something like that. I guess each system is different - H&P are the experts, though, as they designed the pa 1000 /2000 systems.

Regards

james S

1,620 posts

276 months

Monday 19th November 2007
quotequote all
I had exactly the same a couple of years ago. The solution involved sending the alarm back to H&P for resynching with the fob. They also suppled a new red fob which re-programems the system.

It involves taking the motherboard out which is under one of the seats. Car out of action for a week or so.

PM me if I can be of any help. It was quite straightforward if a little fiddly
James

Pope

2,653 posts

278 months

Monday 19th November 2007
quotequote all
I have had this issue a few times, usually after a car has had a flat battery.

Disconnect the battery once again, locate and remove the three system fuses(a 20 Amp and either 1 x 3 Amp and 1 x 5 Amp, OR 2 x 3 Amp depending on build date) which are located either in the fuse box under the front lid or under the dash near the ignition switch. Switch on the vehicle ignition, reconnect the battery then reinsert the fuses and press the indented button. Switch off the ignition and attempt to lock and unlock the car.

This process has worked for me.