Easy 964 Turbo Q
Discussion
Whenever i start the car I get the red "!" warning light which always cancels on first reset. There are no other warning lights that would normally trigger the "!". Is this normal? Had a couple of non turbo 964's and never saw the warning light unless ther was something up. Should I be worried?
r5gttgaz said:
There is a mod for that if you choose to bin the motored one, but the turbo should be done from factory.
My '64 C2 light is on until I drop the handbrake.
Same here think its a factory set.My '64 C2 light is on until I drop the handbrake.
Cant see why it would be the fixed rear spoiler as I can't imagine its wired to anything.
From my book,
Master warning lamp (exclamation mark) remains lit until PDAS (4wd) and brake pressure warning lamps have extinguished and handbrake is released.
Turbo Series,
Hydraulic brake pump over-running? switch off if time exceeds 60 seconds for pressure to be attained.
Airbag, Seatbelt warning, ABS warning, Brake pressure.
Spoiler warning N/A.
Priority 1 (warning light, central warning, warning horn)
Brake boost pressure
ABS
PDAS (4wd)
Priority 2 (warning light, central warning)
Brake fluid low
Fan belt
Handbrake
Oil pressure
Low fuel
Airbag
Priority 3 (warning light only)
Brake pads worn
Washer bottle low
How are the warning lights in the clock? It is fairly common for the circuit board to fail.
Master warning lamp (exclamation mark) remains lit until PDAS (4wd) and brake pressure warning lamps have extinguished and handbrake is released.
Turbo Series,
Hydraulic brake pump over-running? switch off if time exceeds 60 seconds for pressure to be attained.
Airbag, Seatbelt warning, ABS warning, Brake pressure.
Spoiler warning N/A.
Priority 1 (warning light, central warning, warning horn)
Brake boost pressure
ABS
PDAS (4wd)
Priority 2 (warning light, central warning)
Brake fluid low
Fan belt
Handbrake
Oil pressure
Low fuel
Airbag
Priority 3 (warning light only)
Brake pads worn
Washer bottle low
How are the warning lights in the clock? It is fairly common for the circuit board to fail.
Does the airbag light come on? Usual trick is for airbag system to develop a fault, remove airbag light, then everytime you start car you have to reset the computer button. I ran mine for 2 years like that, doesn't really put you out you stop noticing your doing it in the end. Then sorted it just before I sold it 

Benengo's profile says it's a 1991 car so probably not an airbag problem. Don't quite know when airbags came in but mine's from the same year and doesn't have one.
Mine stays on for a minute or so but it's accompanied by another warning light which is the brake booster pressure - I think this is fairly common and mine's done it for all the years I've had the car.
If it doesn't go out on it's own then, I guess, there must be a fault somewhere. With the ignition and the car not running are there any warning lights that don't light up? Might help to know which bulbs are actually working.
Regards
Mine stays on for a minute or so but it's accompanied by another warning light which is the brake booster pressure - I think this is fairly common and mine's done it for all the years I've had the car.
If it doesn't go out on it's own then, I guess, there must be a fault somewhere. With the ignition and the car not running are there any warning lights that don't light up? Might help to know which bulbs are actually working.
Regards
Gassing Station | Porsche General | Top of Page | What's New | My Stuff


