928 Manual box rebuild
Discussion
Call Paul Anderson, www.928spares.co.uk. He's very busy usually, so leave a message. I won't entrust my S4 to anyone else for engine/box work, even though he's miles away.
GG33 said:
How much to rebuild a manual box for a 928GT? and who would you use?
GG
It really depends on what you want to change - synchros/bearings/seals or gears. There is an outfit in Germany, which will charge you EUR2000 for the basic rebuilt which includes bearings, synchros and seals. You will get 24m warranty to go with it too. GG
link to the company's details in German: http://tinyurl.com/3xx36p
If, however, you need to change gear sets, or God forbid the pinion/crown wheel - you are screwed costs wise. For example, the pinion/crown wheel combo is only available from Porsche in Germany and you are looking at EUR2020 + VAT. I have a perfectly good GT box in my parts stache, which needs a pinion...
Often, it is more cost effective to buy a s/h transaxle on eBay and not bother with a rebuilt. I bought a brand new (Porsche Zuffenhausen rebuilt GTS box for EUR1500) on German eBay and have also bought 60k miles GT boxes for around EUR1000 in the past.
Paul A is very good, but very busy as mentioned above. Also, he does not have the tools to set up the diff backlash, so you might want to talk to Porscheshop in Birmingham, who are quite good with transaxle rebuilts. Also, a 1989GT uses a different diff (LSD) from the 1990 onwards PSD...
Edited by Cheburator mk2 on Tuesday 20th November 11:27
Edited by Cheburator mk2 on Tuesday 20th November 17:54
Gassing Station | Porsche General | Top of Page | What's New | My Stuff


