New Tuscan owner drivers door panel removal
Discussion
Take it you mean the inner door card?
Access is via 3 off(maybe 2 on drivers side?) black c/sunk hex head allen bolts - 4mm(?) in the bottom of the door pocket.
Undo those using a flexi-shaft driver or 1/4" drive socket wrench with an extension. Once all are undone, card will lift out from bottom and by sliding down and out will be free of slot in polished ally detail just below window.
There is a damp membrane of 3 ~ 4mm rubber sheet which is glued around the opening. This can be lifted and flipped over glass, holding with a clamp, which allows access to window mechanism, wiring etc.
Re-assembly is the reverse of removal...as they say.
Nick
Access is via 3 off(maybe 2 on drivers side?) black c/sunk hex head allen bolts - 4mm(?) in the bottom of the door pocket.
Undo those using a flexi-shaft driver or 1/4" drive socket wrench with an extension. Once all are undone, card will lift out from bottom and by sliding down and out will be free of slot in polished ally detail just below window.
There is a damp membrane of 3 ~ 4mm rubber sheet which is glued around the opening. This can be lifted and flipped over glass, holding with a clamp, which allows access to window mechanism, wiring etc.
Re-assembly is the reverse of removal...as they say.
Nick
Gassing Station | Tuscan | Top of Page | What's New | My Stuff