Binacle HVAC Tap
Discussion
I'm redoing my interior, going over everything. What is happening with the binacle HVAC duct? It only goes to the AC, the heater/AC mix in the upper portion of the dash.
I can't really even tell if this is OEM or an aftermarket hack. A PCV pipe was plumbed into the rubber elbow. I have everything apart so I'm wondering if i should do something better.
Ideally tapping into the upper dash would be preferable since the air is mixed but i'm sure the airflow would be extremely weak. Any thoughts? This can't be the oem setup, a lot of the cars didnt even have AC, so if you have AC you don't get binacle heat, but if you don't have AC you do..
I can't really even tell if this is OEM or an aftermarket hack. A PCV pipe was plumbed into the rubber elbow. I have everything apart so I'm wondering if i should do something better.
Ideally tapping into the upper dash would be preferable since the air is mixed but i'm sure the airflow would be extremely weak. Any thoughts? This can't be the oem setup, a lot of the cars didnt even have AC, so if you have AC you don't get binacle heat, but if you don't have AC you do..
Edited by czwalga on Sunday 8th November 23:09
Gassing Station | Tuscan | Top of Page | What's New | My Stuff