how do the gear switch lights work?

[DublinTVR]

Another question!

On my Tuscan I went to the owners manual to see how the gear switch lights work, it said turn to page 19, nothing about them on page 19!!! or any other page!

How do they basically work, i can see three lights on top of the upper console in front of me

Cheers

[S1X OK]

Green 6000rpm
Amber 6500rpm
Big Angry Red 7000rpm

These settings can be changed by going into the setup, but I don't know why I'd need to.

[davido140]

S1X OK said:

Green 6000rpm
Amber 6500rpm
Big Angry Red 7000rpm

These settings can be changed by going into the setup, but I don't know why I'd need to.

very handy for running in purposes I have been led to believe....

[terance]

reset mine to red 6.5 &5.5 and4.8 just so i can get them on quicker and stop me maxing the engine all the time.
seems plenty quick enough but then I am a light weight.
tel

[c1sps]

Not sure when you say 'going into the setup' what you mean, exactly ?

Yes......I know I'm dumb....but...........Help !

[onny]

You can change the rev for the change up light by:

1) Swith on the ignition

2) press and hold the function button (bottom right button (dial) on display pod) and Fog light button (top left small brass button on display pod) for about 5 seconds.

A setup menu will display, it has loads of different things that you can set including clock and display contrast etc, scroll through the display until you get to the rev display for the 3 change lights using the function button. change the numbers to what you want and press and hold down the fog light button to exit.

Hope this helps.

Edited by onny on Wednesday 11th July 19:55

[c1sps]

Thanks for the advice - I'll go and have a 'play' now ............. suppose I'd better give the girl a bit of a run, too!!!!!!!!!
Back in a couple of hours...........