Another Generic Part ........Wheel Bearing Assemblies
Discussion
Speed Six (Sagaris, Tuscan, T350, Tamora) Wheel Bearing Assemblies (Front and Rear both the same) are a Chrysler Jeep Cherokee 1999 - 2004 item. Available regularly on E-Bay at approximately £60 (As opposed to TVR's price of £130).
Chrysler Jeep Manufacturers Part NO 513158 OR equivalant PT Nos BR930219, HA597449
Chrysler Jeep Manufacturers Part NO 513158 OR equivalant PT Nos BR930219, HA597449
Edited by Jim Green on Monday 6th April 13:36
Al, can you send the part numbers etc to www.mytuscan.co.uk so he can put them on the list. I sent him details of the Tusc dip beam unit (Hella) but he hasn't updated the website yet. Failing that, just post them here!! Same goes for you Jim - well done for finding out the parts!
I thought maybe it would have been obvious who I was refering too. So to keep the peace I removed the original post. I'm not a person who likes to stir things up.
Just to add........ Always browse the Specialists Web Sites to get the best price. There can be some "Huge" price differences. I paid double the price for the identical part when If I'd spent a moment browsing the web sites then I'd have seen that one of the specialists was selling the item at half the price of the other. £47 versus £23. So if anyones swapping the Cats or doing a decat, they "should" purchase the large "Decat Securing Clamp" from Dom at TVR Power. If you need some new wheel bearing assemblies for a Speed Six Car, you should go on E-Bay and buy them from one of the reputable traders for about £60, as opposed to the regular TVR price of £130.
Enough Said.
Just to add........ Always browse the Specialists Web Sites to get the best price. There can be some "Huge" price differences. I paid double the price for the identical part when If I'd spent a moment browsing the web sites then I'd have seen that one of the specialists was selling the item at half the price of the other. £47 versus £23. So if anyones swapping the Cats or doing a decat, they "should" purchase the large "Decat Securing Clamp" from Dom at TVR Power. If you need some new wheel bearing assemblies for a Speed Six Car, you should go on E-Bay and buy them from one of the reputable traders for about £60, as opposed to the regular TVR price of £130.
Enough Said.
Edited by Jim Green on Monday 6th April 13:32
yep drive shafts are off Ford Grandad so its apropriate that the gaters are also Grandad parts.(shafts snap where the circlip sits in the uj when you start taking flying lessons )
Take the centre nut and bolt from the centre front hub and you can see the splines where a driveshaft would of fitted on the Jeep.i once toyed with the idea of 4 wheel driving a cerbra using 4x4 Grandad box, diff and shafts but too mutch chassis and sump mods needed at the time.
Take the centre nut and bolt from the centre front hub and you can see the splines where a driveshaft would of fitted on the Jeep.i once toyed with the idea of 4 wheel driving a cerbra using 4x4 Grandad box, diff and shafts but too mutch chassis and sump mods needed at the time.
Gassing Station | Tuscan | Top of Page | What's New | My Stuff