A Few Questions

[Parkie]

Hi All
Had the front end in a few bits tonight (as above) and would like to ask the following questions.
While routing around in the front lightwells i found various un-connected connectors, there were two 3 pin connectors (one in each lightwell), one 2 pin connector and a blue cross shaped connector, any ideas what these are? and what they should be connected to? pictures below.







Thanks

P

Edited by Parkie on Tuesday 16th June 20:43

[PetrolHeadPete]

Mine has the same...just flapping in the breeze

[shep1001]

Hi All
Had the front end in a few bits tonight (as above) and would like to ask the following questions.
While routing around in the front lightwells i found various un-connected connectors, there were two 3 pin connectors (one in each lightwell), one 2 pin connector and a blue cross shaped connector, any ideas what these are? and what they should be connected to? pictures below.


Thanks

P

Edited by Parkie on Tuesday 16th June 20:43

[/quote]

Snap!, I found I had the black ones too (I have a Tam not a Tuscan) when I fitted my HID kit. No idea what they are for though so I watch with interest. My best guess would be the loom is a generic item that has several connection options OR were for lights that the TVR was not fitted with.

Edited by shep1001 on Tuesday 16th June 22:26

Edited by shep1001 on Tuesday 16th June 22:26

[FLAT 6]

I haven't looked on mine but I have heard that the headlamps have motors to adjust them which TVR in their wisdom didn't use. So at least one of the connectors is likely to be the power and controls to these motors?

[Parkie]

Thanks for the reply's, seems none of us know what these are for, anyone else have any ideas?

Regards

P