Indicator stuck on
Discussion
Help! Right hand indicators are on solid, is there a control box for these?
doesn't flash, even with hazards, just stays on. Pulled relay, and fuse, still stays on.Update, had to remove hazards/alarm flash fuse. Have indicators now, which is good. Just no hazards or flashing when alarmed. Loath to disconnect battery to reset everything though.
doesn't flash, even with hazards, just stays on. Pulled relay, and fuse, still stays on.Update, had to remove hazards/alarm flash fuse. Have indicators now, which is good. Just no hazards or flashing when alarmed. Loath to disconnect battery to reset everything though.
Edited by Allandwf on Friday 29th April 13:19
Edited by Allandwf on Friday 29th April 16:53
Edited by Allandwf on Friday 29th April 20:30
nrick said:
If you take the panel off just behind the driver, the one with the speaker on (screw in the bottom right of the panel) there is a faulty bulb controller, not sure it controls the indicators or not. It isn't protected or in any form of a box. Do all the bulbs come on?
Everything works fine, its just the left hand indicator is fast. It was fine before TVR power sorted a problem with the pod temp gaugeGassing Station | Tuscan | Top of Page | What's New | My Stuff


