anyone got spare front suspension for sale?

[kirknisbet]

hi team looking for a front pair of suspension if anyone has a set for sale.

also is it the case of jack up remove wheel
loosing top botton bolt and pull out or do i have to remove anything else loike anti roll bar or anything

[pmessling]

I'll have a complete set of front and rear shocks for sale soon.

[Boatbuoy]

pmessling said:

I'll have a complete set of front and rear shocks for sale soon.

Hi Peter,

I'd be interested in the rear shocks, how long before you strip them out?

Regards,
Olly

[G20RG B]

kirknisbet said:

hi team looking for a front pair of suspension if anyone has a set for sale.

also is it the case of jack up remove wheel
loosing top botton bolt and pull out or do i have to remove anything else loike anti roll bar or anything

Just as you said, although I would soak the bolts in some sort of lubrication 24hrs befor you remove the suspension. I would also rest the chassis on axle stands as you will need the jack to move the lower wishbone up/down to enable the bolt to go through the replacement suspension.

[pmessling]

Boatbuoy said:

Hi Peter,

I'd be interested in the rear shocks, how long before you strip them out?

Regards,
Olly

Hopefully in the next couple of weeks, just waiting on my gaz gold pro's and poly bush set to turn up, then i can start stripping it all out, remove the bushes, get the wishbones etc cleaned up and re powder coated for the long term, not sure on the condition of the rear shocks as i've been tracing a rear end knock for months, and done the diff bushes, roll bar bushes, so thought sod it and do the lot in one go.

The properly aligned and MOT'd at the end of june.

[Boatbuoy]

pmessling said:

Boatbuoy said:

Hi Peter,

I'd be interested in the rear shocks, how long before you strip them out?

Regards,
Olly

Hopefully in the next couple of weeks, just waiting on my gaz gold pro's and poly bush set to turn up, then i can start stripping it all out, remove the bushes, get the wishbones etc cleaned up and re powder coated for the long term, not sure on the condition of the rear shocks as i've been tracing a rear end knock for months, and done the diff bushes, roll bar bushes, so thought sod it and do the lot in one go.

The properly aligned and MOT'd at the end of june.

Cool, I'm not up for replacing mine for fancy stuff (yet), but I know one of my rear shocks is leaking (MOT Failure I believe?!?!) so I just need to source a replacement. I wouldn't dream of replacing just the damaged one, so looking for a pair off of another car. Do you know how many miles yours have covered?

[pmessling]

Car is currenlty on 22k. Once they are removed I'll check them over properly to make sure they are 100% servicable.

[QuiteQuietCerb]

hi i have a rear set, and soon will be looking for a full one, if interested

[kirknisbet]

pmessling said:

I'll have a complete set of front and rear shocks for sale soon.

cool how much would you take for them mate.what make are they

[pmessling]

They are the original ones from my car my cerbera is a 2004 model with 22k. Need to remove them and check them l over so will let people know as soon a I have as for price I don't even know any ideas

[kirknisbet]

not sure mate i just need a cheap fix till i get some cash to get a set of gaz golds

[simoncrowe]

Hi, I am stripping the suspension off mine in the next week or so and the front and rear shocks will be for sale. I am sure they are gaz golds but will check tomorrow for any interested parties. These will be for sale on a first come first served basis if anybody wants them

[K33LER]

Hello everyone... I need a set of rear shocks for mine. I just finished the £5800 Cerbera which has needed about £1500 work but just need to replace a rear leaking rear shock, get the Dim Dip box to 'dim & dip' and replace the headlight reflectors!!

This is my second Cerb and hope to contribute to the site more from now on!!