100/80w bulbs
100/80w bulbs
Author
Discussion

Jcerb

Original Poster:

344 posts

187 months

Tuesday 2nd August 2011
quotequote all
Are these safe to use?(I hear rumours dealers use these??)I currently have 55w which are terrible, i have new reflectors but just want to have better lights as a temporary fix before replacing reflectors etc, many thanks!

FarmyardPants

4,372 posts

247 months

Tuesday 2nd August 2011
quotequote all
Best bet is to use relays. You can buy a relay harness which plugs into the existing wiring and only needs a feed from the battery - contains the relay and inline fuse.

Luckyone

1,091 posts

261 months

Tuesday 2nd August 2011
quotequote all
Yes use relays, I fitted them (with relays & chunky wires) to a beetle years ago. Made a big difference, was worth the effort.

Tanguero

4,535 posts

230 months

Tuesday 2nd August 2011
quotequote all
Don't fit 80/100W bulbs without using a relay and separate supply. The power wire connector from the control box in the boot is marginal and tends to burn with standard bulbs. High wattage ones will burn out the connector.

Jcerb

Original Poster:

344 posts

187 months

Tuesday 2nd August 2011
quotequote all
Thanks a lot guys for your help here, i will look into it as they really let the car down big time.

Barkychoc

7,848 posts

233 months

Tuesday 2nd August 2011
quotequote all
Do Cerbs have 7" Mini headlamps?

If so try these

http://www.minispares.com/Product.aspx?ty=pb&p...

I can't even begin to tell you how much more modern they look on a V8S with the clear front lenses. They are way cheaper here too than anywhere else and very easy to fit. Brighter too biggrin

SimonSparrow

1,599 posts

291 months

Wednesday 3rd August 2011
quotequote all
I use relays trippped by the original wiring so that I can use a bigger cable (less voltage drop) from the battery. I also did this for the two cooling fans.

For bulbs I bought some PIAA rally bulbs, still only 55/60w but very bright. Not sure if those mini lights would fit, but they might. on the Cerb the reflector is seperate (from a Scania truck I think) from the front lense. I'm sure someone has fitted VW Lupo lights to a cerb or chim?

PoleDriver

29,587 posts

223 months

Saturday 6th August 2011
quotequote all
Try Osram Nightbreaker plus bulbs. Far more light than standard but still standard power.
Cleaning/replacing the reflector/lens will make a big difference!

If you do use higher wattage bulbs you must fit relays! The previous owner of my Cerb didn't bother doing the job properly and the wiring at the control box was badly burned!

gruffalo

8,150 posts

255 months

Saturday 6th August 2011
quotequote all
Or fit HiD bulbs, that is the route that I went down along with a relay kit, I can finally drive at night now.

PoleDriver

29,587 posts

223 months

Saturday 6th August 2011
quotequote all
Or you could always fit alternative headlights... That's what I resorted to in the end!