Re fit airbox

[gerradiuk]

As some may know I have just bought a Cerbera that had open cone filters fitted, I have changed back to the original airbox due to heat etc.


I have found a 13 -14mm hole (on the N/side of the car) just in front where the rubber hose connects to the airbox... was this for a air sensor?
On the air intakes at the engine ,same side there is a Air sensor plugged in that is (was) just in front of the cone filter , will I need to re site this to the front or just put a rubber grommet in the hole ?

[Tanguero]

Yes the hole in the front airbox on the N/S is is for the air temperature sensor. I would move it back to there.