type of bolts holding hub to hubcarrier (the 3 bolts)

[flyingdutchie]

There is a hole at the back of the carrier where the bolt goes in. I've tried to put different things in, but nothing i have seems to fit. Is it a allenbolt. How many mm's? Please help me, as I am working on the car now.

[Allandwf]

Sure they are allen bolts, cant remember exact size. about 8mm ish.

[flyingdutchie]

It is the 10mm allen bolt. Must have been my mistake. Nothing seemed to fit until I used a bit more force. What a bloody job this can be. I did found a description on the internet where they spaek about other torque settings to what is communicated here on pistonheads. The 3 allen bolts should be fastened with 70-75 pounds and the central bolt with 170 pounds. Respectively 40-45 and 70-75 are communicated here.

http://www.ehow.com/how_7387042_replace-front-whee...

Not a official Jeep document, I must say..... The differences are big though.

[pmessling]

I've recently had all the hubs apart and replaced the bolts and the hub nut and the torque figures on here are fine.

[flyingdutchie]

Which brand/make of bearings did you choose. I hear people say that the cheaper ones come from China.