Tuscan suspension on a Cerbera

[david kelsey]

Hi all
Have been quietly refurbing the rear suspension and chassis on my 99 speed six

In doing so i have discovered that the components are in fact off of a Tuscan suspension system

Does anybody have any idea why this would be and if it is a good or a bad thing
All help appreciated

[Tanguero]

Looks to me like the Tuscan suspension is off a Cerbera...

[Boosted Cerb]

Yep they are the same, the later Tuscan 2 was slightly different but not much.

I've got a complete set of Mk1 tuscan front suspension here, bought it with a Tuscan steering rack which is also the same as the Cerb's.

Rich.

[david kelsey]

Hi Rich. Nothing to worry about then

Apart from the wrong bushes i purchased

Hows the porsche going??

[Brummmie]

Saggy is wider track, if you fancy doing a wide body!?

I have Tuscan 2 rack on mine, i think the knuckles are in a different position, so that they are more in line with the wishbones, (made bump steer even worse, until the arms were leveled) but they fit.

[Boosted Cerb]

david kelsey said:

Hi Rich. Nothing to worry about then

Apart from the wrong bushes i purchased

Hows the porsche going??

Not too bad hopefully get it all rubbed down by the end of the weekend, fingers crossed.

Just seen you're pic, couldn't see it at work last night.....it'll be worth unscrewing and greasing up the adjuster for the rear track adjustment, its the corner of the wishbone on the right of the pic, there's a lock nut and a nut inside the wishbone which holds the adjuster collar. I can check the rear toe in for you once its back together, makes it much easier to adjust if its all been apart and greased.

rich.