How to remove the Fuse Box

[Dave 500]

Like the title

I have found one of the bolts which holds the fuse box in but how do I get to the one near the fuel Tank?

Any ideas....

Or does anyone know of an easy way of taking power from the fuse box without removing to much of the car.

Its to fit an amp (no more than 150W)

Cheers

[Tanguero]

Undo the single bolt and ease it forward. It is fairly obvious where the main feed attaches to the back of it. I soldered a suitable gauge wire to the back and ran it to external fuses for my amp and car PC.

[Dave 500]

Cheers

I found the one bolt but it felt like it was held in with another on the other side.

Will go and try to wiggle it free

[Tanguero]

Yes - it takes a bit of careful easing and fidgeting, but should come a few inches out of the alcove. Certainly enough to get to the back with a soldering iron.