Oil pressure switch

[Toadusmodus]

Had a small oil leak from the oil pressure switch for a while, so have just got a replacement. Old one did not have a washer, so probably explains leak. Anyway, does anyone know what torque for fitting the switch?

[Gray_101]

When I changed mine, I just nipped it up tight, and it's been fine.

If your handy with spanners you should be able to judge when it's tight enough.

[Toadusmodus]

Gray_101 said:

When I changed mine, I just nipped it up tight, and it's been fine.

If your handy with spanners you should be able to judge when it's tight enough.

Handy with spanners.......... possibly a bit of a spanner more like! But thanks, will go for what feels right and see. Thanks!

[ukkid35]

If you use a 1/4" drive ratchet you can't really go wrong.

[Toadusmodus]

ukkid35 said:

If you use a 1/4" drive ratchet you can't really go wrong.

Good thinking Batman, will step away from the 1/2" ratchet.....