electric windows slow
Discussion
I used some silicone grease in the window channel after cleaning it first as it was full of gunk. Probably because it goes everyhwere with the window down so I can hear the exhaust better.
As above make sure the electrics are clean as I get the impression that the windows draw quite a bit when moving.
As above make sure the electrics are clean as I get the impression that the windows draw quite a bit when moving.
Ditto.
Check/clean both connectors. You can see on of the connectors undone on the photo..., the one in the hole. Theres also the main connector which you'll have to unclip to totally remove the door panel.
The other one is above the date.
>> Edited by kojak69 on Tuesday 13th July 18:22
Check/clean both connectors. You can see on of the connectors undone on the photo..., the one in the hole. Theres also the main connector which you'll have to unclip to totally remove the door panel.
The other one is above the date.
>> Edited by kojak69 on Tuesday 13th July 18:22
Gassing Station | Cerbera | Top of Page | What's New | My Stuff



) and he took the opportunity to clean up all the battery contacts while the battery was disconnected. The end result was full speed windows... 