Suspension settings

[Tin Tin]

As the search facility is down still, could someone tell me what the settings are for the suspension geometry on the Cerbera? Mine is a 1997 one if that makes any difference.

I would also be interested to know what thoughts there are on ride heights - I've heard from around 100mm through to 160mm from the outriggers. I am looking for a height that will
clear speed bumps etc but give good handling round the roads.

Cheers.

[pmessling]

i was told 120mm from the outiggers, however i found this too low and set it to about 145mm, although mine may have settled a bit now.

[Tanguero]

1997 4.2 Cerbera

Camber Degrees - 0.5 to 1.25 negative both front and rear

Caster Degrees - 3.5 to 4.5 positive front (rear n/a)

Toe Minutes - 10 to 20 in, both front and rear.

Ride height 130mm from outrigger corner plate.

[Tin Tin]

Thanks everyone, thats a great help.