Help please - door switch wiring

[pkjks]

I have just removed the door panel for speaker installation/trim etc. In the meantime, which two colour wires do I bridge to operate the door lock?

thanks

Peter

[trooper1212]

Do you just want to get the door open without the interior button? Then the outside button should still work or the manual door release.

Bearing in mind this is my car and not yours

The outside button has a black and blue connector attached, the door switch is on the black 6-way (of which 4 wires are connected).

The interior button has a similar arrangement of black and blue connectors so I would assume the black block runs the door switch there too, but I haven't tried it.
I wouldn't have the first idea which wires you need to bridge, as on mine the corresponding wires into and out of each block were a different colour! I had to make a diagram to ensure I didn't wire it up incorrectly and I don't have that diagram with me I'm afraid.

I know TVRs are built down to a budget, but you would at least expect them to use the same colour wire for each of the connections!

Have fun

[pkjks]

Thanks, you've just helped put my brain into gear.

peter