Alloys for a cerb (97mod/4.2)

[Norwegian]

I am a bit confused, I d like to buy me some new alloys, so i called TVR in blackpool and asked for all the specs i needed to know to buy me some alloys from my wheel shop home in Norway, and then I got for a answer that TVR Cerbera, didnt match any other alloys than TVR Alloys, ok I thought, I have to buy some from uk, but today I saw in the Classifieds that Henley are selling a 97 mod cerb with 17" TSW whhels, how can this be possible? Anybodu know the offset, ET, bolt diameter (5x100? 5x113?) Thanks for any contribution....

[carl_w]

I believe they're 5 stud, 114.3 PCD, offset around 35mm.

See www.pistonheads.com/gassing/topic.asp?f=6&h=&t=73860

Motion TVR at www.tvrmotion.co.uk do some nice wheels too.

>> Edited by carl_w on Tuesday 27th July 22:12

[bluemanc]

don't forget the spigot diameter, i think its 71.4mm.
the fittings the same as most jap cars so there's plenty of rims to choose from.try before you buy though
cos the spokes can foul the front calipers and you'll have to fit spacers. i've got fox rs3's on mine,clear the calipers by 5-6mm no rubbing on full lock,no spacers.straight on, no probs.

[Norwegian]

Thanks, bought of you, I will contact my dealer tomorrow, do you have any pics bluemanc?
what about tyres will 225/45/18" do?

[bluemanc]

no pics yet unless someone's got some from the BNG,most
wheel dealers have them in their catalogue,got mine from somewhere called topgear,did the best deal for wheels and toyos.