NS speaker only works with door open.
Discussion
Hi guys.
I've unscrewed the speaker from the door card and all the wiring behind there seems OK when I mess about. When the door is shut the speaker stops working. I can make out a thick grey "wire" of some description right at the back of the door near the hinge - is this some sort of harness? Do I need to take the door off to access it?
Cheers.
I've unscrewed the speaker from the door card and all the wiring behind there seems OK when I mess about. When the door is shut the speaker stops working. I can make out a thick grey "wire" of some description right at the back of the door near the hinge - is this some sort of harness? Do I need to take the door off to access it?
Cheers.
Robscim said:
Rob,
I understand there's a connector box inside the A pillar accessed from inside the footwell behind the carpet. I'd start there for a loose connector/wire.
This ^I understand there's a connector box inside the A pillar accessed from inside the footwell behind the carpet. I'd start there for a loose connector/wire.
I'd start in this area looking for a loose connection to the speaker - bear in mind there are only 2 wires to chase and locate.
If the speaker is working when the door is in only one position then it has to be one of these.
Ok guys, cheers. I'll chase the wiring fault and go from there. Has anyone changed their speakers to aftermarket ones? Any recommendations? What size are the original door speakers? I'd like it to look like original but the standard ones are atrociously poor.
PS - Preferably ones available from Halfords, as I have vouchers.
PS - Preferably ones available from Halfords, as I have vouchers.

Edited by robsco on Saturday 11th August 15:15
Gassing Station | Cerbera | Top of Page | What's New | My Stuff




