AJP spark plug size

[Gray_101]

Hi

Does any one know the spark plug thread size off the top of there heads ?

My guess would be 16 mm but I'm at work at the moment so I carnt check on my own car

Thanks

[jackwibble]

More importantly Mr Pink Lady its back? and the scores on the door are?

[Gray_101]

Numbers are the last thing on my mind at the moment John.

Do me a favor, whip one off your plugs out ( not your butt plug ) and measure it.

Thanks.

[Gazzab]

Gray_101 said:

Numbers are the last thing on my mind at the moment John.

Do me a favor, whip one off your plugs out ( not your butt plug ) and measure it.

Thanks.

Boys - just book a hotel and get on with it. Wives will never know.

[Gray_101]

Gazzab said:

Boys - just book a hotel and get on with it. Wives will never know.

I ll stick with our lass. But thanks for idea .

Any ways... Spark plug thread size please !!!!'nn

[Gazzab]

Are they NGK BKR5EKU:-

Thread Diameter 14mm
Thread Reach 19mm
Seat Type flat
Hex Size 16mm
Tip configuration projected
Construction/note 2 ground electrodes
Terminal Type Solid

[jackwibble]

Always rely on GazzaB

[Gray_101]

Gazzab said:

Are they NGK BKR5EKU:-

Thread Diameter 14mm
Thread Reach 19mm
Seat Type flat
Hex Size 16mm
Tip configuration projected
Construction/note 2 ground electrodes
Terminal Type Solid

Top Man !!

Just the info I wanted,, thanks

[gruffalo]

Gray_101 said:

Numbers are the last thing on my mind at the moment John.

That doesn't sound too good.

[Gray_101]

gruffalo said:

That doesn't sound too good.

Ive had a few set backs with my AJP, but it's nothing that carnt be fixed

[mikethebike1127]

Remember you'll need a thin walled plug key or socket.....a standard 16mm plug socket struggles to get down into the cylinder head.

[gerradiuk]

Getting them in & out not to bad ,but getting the plug suppressor cap to click on the one's nearest the bulkhead is nigh on impossible !!

good luck (chortle)

[spitfire4v8]

snap-on do an excellent thin walled socket with a universal joint built in .. saves a LOT of swearing. Pricey but a good investment if you do a lot of servicing in the future

[DuncanM]

spitfire4v8 said:

snap-on do an excellent thin walled socket with a universal joint built in .. saves a LOT of swearing. Pricey but a good investment if you do a lot of servicing in the future

Bought a completely awesome one from Lidl of all places

[andrewlloyd]

hi there graham see youve got the beast up and running seems everybodys exited about your ground breaking project still havent put the manifolds on that i bought of you but the cars up and running just trying to get the best out of the engine now best of luck with the engine regards andy

[Gray_101]

Hi Andrew.

Good to hear your Cerbs up and running, mines been a roller coaster ride of ups and downs. But its nearly there.

I got mine back from a well known Indy last week, only to find a whole load of new issus to rectify. But there all fixed now. Its going for a big brake converison first job tomorrow but still no idea on power as its only had 7 of the 11 mapping sites done.

Its the south yorks TVRCC evening meet wed 19 th if your intrested in going along ?

[andrewlloyd]

im away diving on the 15th to the 22nd so wont be able to get there this month but hopefully will devo be there next month will you be bringing the car next time will be nice to see what youve done was told by stevemc on the tvrcc forum the venue had be moved to the stockyard just of the m18 is this rite ?

[jackwibble]

Gray the meet has now switched to Sundays at the Stockyard again but this Sunday its at CITP at Lotherton Hall just up the A1 meeting up at Barnsdale Bar Services A1 nbc at 10am if anyone is interested.