EBay Cerbera
EBay Cerbera
Author
Discussion

W111AAM

Original Poster:

665 posts

256 months

Tuesday 4th December 2012
quotequote all
Very pretty looking thing. What will it cost to get sorted do you think?

http://bit.ly/QAlqkH

gruffalo

8,100 posts

250 months

Tuesday 4th December 2012
quotequote all
Interesting, the ad mentions the colour and loads tattle but I can't see it even mention the engine size.

The gearbox not selecting gears is not a lubrication or hit it with a hammer fix, it is almost certainly the seals in the clutch slave cylinder, not a huge job just a couple of hundred quid in a specialist garage or a few hours work if yo ucan spanner yourself.

It would be worth getting a specialist garage to go along and look at it with you before you bid/buy.

If it is as described and the chassis is good it could be a bargin.

Tanguero

4,535 posts

225 months

Tuesday 4th December 2012
quotequote all
Probably best budget for a gearbox rebuild and a new clutch at a minimum. Chassis and engine rebuild at worst. (It is a Speed 6 according to the DVLA)

If, as the seller claims, it is as simple as whacking the gearbox from underneath then the cynic in me suggests that they would have done so by now especially as they claim to be in no hurry to sell and it would add considerably to value.

T5s don't seize up just from sitting unused! If the seller is being disingenuous about that, then how much of the rest of the advert is true?

ETA If they cant get the box to select a gear with the engine off then it isn't just the clutch gone as far as I can see.

Edited by Tanguero on Tuesday 4th December 12:17

Mags

1,196 posts

303 months

Tuesday 4th December 2012
quotequote all
I'd be more worried about how he restarted the engine based on the gearbox comments. Not turning over for 4 years I assume means any trace of oil has drained into the sump, isn't it good practice to put a bit of oil down the bores and spin it over without sparkplugs to get the oil pressure up first? how long after firing up would it take for the pressure to come up?

Erijaso

505 posts

279 months

Tuesday 4th December 2012
quotequote all

Why's he shouting the advert at us. Turn of the caps man!!!

gruffalo

8,100 posts

250 months

Tuesday 4th December 2012
quotequote all
Mags said:
I'd be more worried about how he restarted the engine based on the gearbox comments. Not turning over for 4 years I assume means any trace of oil has drained into the sump, isn't it good practice to put a bit of oil down the bores and spin it over without sparkplugs to get the oil pressure up first? how long after firing up would it take for the pressure to come up?
It is a six pot so dry sumped any way. A squirt of oil down the bores may help if partially siezed but if I would not expect too much of a problem.

Mr Cerbera

5,148 posts

254 months

Tuesday 4th December 2012
quotequote all
£12,000

Zeemax_Mini

1,235 posts

275 months

Tuesday 4th December 2012
quotequote all
This was my Dad's old car - just spotted it on eBay. He bought it in 1999 with 3k miles on the clock and owned it for a good few years (and three engine rebuilds), was always at the dealer having something sorted and looks like it's still giving grief now! For anyone interested in the car, I just double checked with my Dad and he confirmed it had 16,000 miles on the clock when he sold it so it's definitely been clocked. Would make me wonder what else has been bodged!

Dom

brakedust

1,059 posts

233 months

Tuesday 4th December 2012
quotequote all
Zeemax_Mini said:
This was my Dad's old car - just spotted it on eBay. He bought it in 1999 with 3k miles on the clock and owned it for a good few years (and three engine rebuilds), was always at the dealer having something sorted and looks like it's still giving grief now! For anyone interested in the car, I just double checked with my Dad and he confirmed it had 16,000 miles on the clock when he sold it so it's definitely been clocked. Would make me wonder what else has been bodged!

Dom
Sounds rather dodgy in that case, shame as its one of my fave colours for a Cerb.

Anyone thinking of having a look?

Zeemax_Mini

1,235 posts

275 months

Tuesday 4th December 2012
quotequote all
brakedust said:
Sounds rather dodgy in that case, shame as its one of my fave colours for a Cerb.

Anyone thinking of having a look?
I think Dad just had bad luck (and awful backup from the factory) with the engines etc, which should have been sorted with the 2006 engine rebuild that the eBay ad mentions. Obviously needs that gearbox issue sorting out, but being clocked probably isn't the end of the world if the condition and history paperwork stacks up - just worth looking through it all VERY closely!!

Dom

good40

286 posts

168 months

Gray_101

1,118 posts

214 months

Tuesday 4th December 2012
quotequote all


Edited by Gray_101 on Tuesday 4th December 20:34

Gray_101

1,118 posts

214 months

Tuesday 4th December 2012
quotequote all
The gear box is an easy job to change, I've removed mine more than once.

It looks a really clean car... But when where the photos taken ?

natben

2,748 posts

255 months

Tuesday 4th December 2012
quotequote all
It would be good to see some picture of the car in it's current location as the one's posted must be 4yrs old as the seller says it has been stored for this period of time. But could be a bargain for someone and with a TVR power rebuild it should be fine for a long time.

Zeemax_Mini

1,235 posts

275 months

Tuesday 4th December 2012
quotequote all
If anyone is serious about the car and wants me to find out any more about it's history, feel free to PM me and I can get any questions answered by my father - he had it between 3k miles (6 months old or so I think) and 16k miles. I know he spent a huge amount of money on it and I think the only issues were engine/gearbox related rather than electrical etc. It was well specced, though obviously had the original lights and 16" SP6 wheels when he had it. It also looks like it's had some paintwork - it certainly didn't shine like that when he sold it!

Dom

ETA: He sold it privately (must have been around 2003 or so), so I guess the guy he sold it to diddled the mileage before selling it to Agger and subsequently the eBay seller's brother.

V8 OWL

79 posts

184 months

Wednesday 5th December 2012
quotequote all
If the clocks not right I would keep well clear of this car, it could have done 30k and without a service for the last 14k. (Its made to look as if its just had a service in mileage terms.

I don't think there are any bargains in the cerb market less than £12k, better to spend £13- 14k on a well sorted model.

Regards to the engine start up after 4 years, wouldn't you first do an oil and filter change?

I wouldn't be suprised if the new owner had to spend £6k to put this cerb back on the road.

Mags

1,196 posts

303 months

Wednesday 5th December 2012
quotequote all
gruffalo said:
It is a six pot so dry sumped any way. A squirt of oil down the bores may help if partially siezed but if I would not expect too much of a problem.
Fair enough but as V8 Owl says, I'd hope for a bit more TLC before a 4 year re-start, maybe I'm being picky and not fair to the guy advertising but the gearbox comments alone would put me off. Aanyway, I'm not in the market so I'll get me coat.

TVR Tommy

623 posts

249 months

Wednesday 5th December 2012
quotequote all
I was contemplating buying this as a bit of a winter project to tinker with. But I think I'll give it a miss after the mileage discrepancy. Some current pictures would be nice also.

anonymous-user

78 months

Wednesday 5th December 2012
quotequote all
V8 OWL said:
If the clocks not right I would keep well clear of this car, it could have done 30k and without a service for the last 14k. (Its made to look as if its just had a service in mileage terms.

I don't think there are any bargains in the cerb market less than £12k, better to spend £13- 14k on a well sorted model.

Regards to the engine start up after 4 years, wouldn't you first do an oil and filter change?

I wouldn't be surprised if the new owner had to spend £6k to put this cerb back on the road.
If the engine hasn't been turned over in all that time, could it shorten the valve springs that have been sat in compression for that length of time too? And could that cause excess wear to finger followers and cam or possibly snap?

Mr Cerbera

5,148 posts

254 months

Wednesday 5th December 2012
quotequote all
good40 said:
Ooh, that's a bit pricey, isn't it ?? getmecoat