Quadconversion rear afterburner cluster now unavailable????

[fubar sounds]

After deciding that the quadconversion rear cluster was the only one that I actually liked , I was sadly disappointed to hear that not only had they sold out last week , but they were seriously considering not manufacturing anymore due to lack of interest . So does anyone perhaps know of any lieing around someplace being unused? Regards

[h16abl]

Think race proven in Sheffield do a similar quad rear light set Grey101 has a set if this helps

[ChuckL]

I am having mine changed to these and the twin headlight pods at the front. My bodyshop man got these in last week from a local supplier Milton Keynes way. I could find out more or put you in contact if that would help.

[fubar sounds]

although they are from quadconversion they are actually only a 3 light piece

http://www.quadconversions.com/tvr_chimaera_and_ce...

and apparently they did a version that had 2 sets of led rings instead of a reflector and 1 led ring , making it all matching colours when off and 2 very bright red rings when on, (not sure of the legality of exchanging the reflector for an led ring ) but wanted them very much, may have sourced some 2nd hand ones not sure yet though.

[Mr Cerbera]

fubar sounds said:

..... may have sourced some 2nd hand ones not sure yet though.

Ummmm, sorry but are you saying that they've got exactly what you want for less than full L.P. and you're not sure whether to get them ??

If so could you let me have he contact details please ?

Ta !

[SL500]

You could always take a mould off an existing car and make some up. You might get a few orders also. I personally like the afterburners.

[fubar sounds]

Someone I spoke to knows of a cerb with a rear cluster mod where the owner wishes to revert back to original spec, BUT we don't know which version it is, but apparently they are the " expensive ones ." I m hoping its not the 4 light version. Even if it pans out it also sounds like a convoluted process.

[cerdad]

The cluster you are talking about has two reversing and two fog ?,if so i have them on mine, they were made by a firm local to me .All the lights i think were Hella .I bought them as the last complete set but they still have the moulds for the housing,They did me a set of the front pods too ,but i never used them prefering the 7" .

[fubar sounds]

unfortunately it turns out that they are the 4 bulb cluster which i m not into , so still in the market for these ,

http://www.quadconversions.com/tvr_chimaera_and_ce...

whos got some then ? pls pm me

[Gazzab]

eBay has lots of fiesta based lights options, although I prefer the Fiesta centre pages stuck to my rear.

[h16abl]

Gazzab said:

eBay has lots of fiesta based lights options, although I prefer the Fiesta centre pages stuck to my rear.

Your a sick puppy

[jamieduff1981]

I think the quad clusters look good but I'm not going to cut up an original spec car to fit them. It's a 90s car afterall - Fiesta lights, RL7s, what's not to like? lol

[Gazzab]

h16abl said:

Gazzab said:

eBay has lots of fiesta based lights options, although I prefer the Fiesta centre pages stuck to my rear.

Your a sick puppy

What's not to like?

[fubar sounds]

Looks like they ll be staying stock

[Gazzab]

Ridds made his own...

[Byker28i]

jamieduff1981 said:

I think the quad clusters look good but I'm not going to cut up an original spec car to fit them. It's a 90s car afterall - Fiesta lights, RL7s, what's not to like? lol

Good Man. I'm keeping mine original as well.

[h16abl]

Gazzab said:

What's not to like?

If you dont know im not telling you

[fubar sounds]

I dropped my Cerb off today at tvr central to have the dash retrimmed (insurance paying for windscreen replacement ) and after trying to sell sell me the 4 light cluster Adrian showed me the parts for the 3 light cluster from previous jobs , decided that he had enough to make a pair , then took me across the yard to a fibreglasser who happened to have the moulds for 3 and 4 light rear clusters , and they now making me up a pair , how good is that ,

[cerdad]

These are the lights in the back of my car , i could not photo them as they were frosted up .the chap who made them still has the molds ,he did mine in 2008 .

[andydw]

I have just been informed that the quadconversion afterburners do not fit my car (a Jan 03 speed 6) without a significant amount of fabrication. They only fit the "earlier" model apparently. I am sceptical about this claim - can anyone who has them tell me of their experience?