Freshen'up - Respray
Discussion
I am trying a new guy (came recommended to me by my brother) who is respraying my car. It was looking a bit beat up on the paintwork side after the last person who resprayed it the paint started falling off!Nice Paul Nice. Lacker pealing and its had a few bumps from here and there.
Anyways, I thought I would send a link over the pics - no change of colour, but looks amazing now - got the blue/purple flip shinning through - I cannot wait to see it in the flesh.
More here - http://ow.ly/h8Uig of the sanding and process.
Anyways, I thought I would send a link over the pics - no change of colour, but looks amazing now - got the blue/purple flip shinning through - I cannot wait to see it in the flesh.
More here - http://ow.ly/h8Uig of the sanding and process.
aide said:
What's the colour?
Azure Blue with a slight enhanced mix of more pearl. It flips to purple - dual colour not like the three colours out there.aide said:
Post a few more pics when its all finished please?
I will update the link above.aide said:
Someone mentioned to me that the area just under the bottom corner of windscreen is prone to developing little hairline cracks. Its caused by overloading the boot. So one to look out for now that it's all resprayed.
This is also caused by 19 year old girls going into the back of you when parked. This is the third respray. One just when I bought her, the second by a namesless person as it was s
t. ....so far looks the absolute tits.andydw said:
Looks good. Be interested in who did your rear lights for you and what units you've got in them? And approx cost of doing it?
The lights are a combination of the new style and a mix - I know who did them but I have not seen another like it.It took me a long time to like them.
The lights inside I am changing to my own designed LED aluminium rings. Thus having "four LED rings" and the Indicators, reverse, fog are in the center - similar to the hella afterburner lights. But the difference is the brake will illuminate more LED's in the ring.
dean_ratpac said:
....
The lights inside I am changing to my own designed LED aluminium rings. Thus having "four LED rings" and the Indicators, reverse, fog are in the center - similar to the hella afterburner lights. But the difference is the brake will illuminate more LED's in the ring.
Oooh, Deano ! That sounds exctly like the idea I was toying with.The lights inside I am changing to my own designed LED aluminium rings. Thus having "four LED rings" and the Indicators, reverse, fog are in the center - similar to the hella afterburner lights. But the difference is the brake will illuminate more LED's in the ring.
How are you going to set about starting the whole thing off ??
Mr Cerbera said:
Oooh, Deano ! That sounds exctly like the idea I was toying with.
How are you going to set about starting the whole thing off ??
Well my brother builds high-end parts for the drift car world - so the machining can be done there with billet aluminium he's a whizz with electronics too.How are you going to set about starting the whole thing off ??
Also at the same time I am looking to get a few parts in the engine bay made in billet - but this would be a separate post so I could gauge numbers.
Items would include.
Bells
Brackets
Oil Caps
Air Box Brackets
Pulleys
Buttons
Maybe PM me your number and lets chat.
Hi dean
The repaint looks great bet you well pleased
The LEDs you were talking about would the be a
Direct replacement for the standerd 4 light set up
Found on later cerbs ie 2003 if so then I would be interested
In a set make sure you keep us posted on your cars progress
And the progress of your side line of products
Chears jim
The repaint looks great bet you well pleased
The LEDs you were talking about would the be a
Direct replacement for the standerd 4 light set up
Found on later cerbs ie 2003 if so then I would be interested
In a set make sure you keep us posted on your cars progress
And the progress of your side line of products
Chears jim
Gassing Station | Cerbera | Top of Page | What's New | My Stuff