MOT time again and....

[PuffsBack]

Passed, no issues and no advisories

I'm a very happy man, even the sun is shining

[aide]

Nice!
Mine's on Saturday morning..

ETA: should be fine..

[Mr Cerbera]

Please send some of that "Puff's Luck" over asap.
Mine's next Weds

[PuffsBack]

Hmmmm beginning to suspect my Speed 6 has been rebuilt as a Prius hybrid engine at some point. The emissions are embarrasing.

Fast Idle Hydro Carbons = 9ppm!! (Limit is 200)
Fast Idle CO = .02% (Limit is .30%)

and as for the Natural idle CO - 0.00%!!!! (whats it running on electricity?)

OK I am off to the shops to buy some sandals and grow a beard.

Edited by PuffsBack on Thursday 2nd May 15:35

[Mr Cerbera]

PuffsBack said:

Hmmmm beginning to suspect my Speed 6 has been rebuilt as a Prius hybrid engine at some point. The emissions are embarrasing.

Fast Idle Hydro Carbons = 9ppm!! (Limit is 200)
Fast Idle CO = .02% (Limit is .30%)

and as for the Natural idle CO - 0.00%!!!! (whats it running on electricity?)

OK I am off to the shops to buy some sandals and grow a beard.

[gruffalo]

PuffsBack said:

Hmmmm beginning to suspect my Speed 6 has been rebuilt as a Prius hybrid engine at some point. The emissions are embarrasing.

Fast Idle Hydro Carbons = 9ppm!! (Limit is 200)
Fast Idle CO = .02% (Limit is .30%)

and as for the Natural idle CO - 0.00%!!!! (whats it running on electricity?)

OK I am off to the shops to buy some sandals and grow a beard.

Edited by PuffsBack on Thursday 2nd May 15:35

better get some lentils while you are out.

[spongy]

well done sir my emissions more than made up for yours .....glad to hear a cerb can get through the emissions without hassle.

[wiggycerb]

Well mine went in today and all is well, so she lives to fight another year

[aide]

Pass. 100%

[weeman6556]

Impressive results, out of interest Has anyone had issues with lambda at high idle? During my last mot it took a bit of practice and a patient tester to get it to pass.

[PuffsBack]

weeman6556 said:

Impressive results, out of interest Has anyone had issues with lambda at high idle? During my last mot it took a bit of practice and a patient tester to get it to pass.

Pass for a Cerbera should be between .9 and 1.2 (mine managed 1.05)

Make sure they set the machine up right for a TVR otherwise at the default settings it will need make 1.02 to pass and that will take some coaxing

[weeman6556]

PuffsBack said:

Pass for a Cerbera should be between .9 and 1.2 (mine managed 1.05)

Make sure they set the machine up right for a TVR otherwise at the default settings it will need make 1.02 to pass and that will take some coaxing

Cheers PuffsBack, I think it was set for 1.02. Grrr TVR friendly station next year.

thanks for the help.