number plate

[spongy]

Well crew have decided to get my new reg plate for the old girl......how much of a ball ache is the change over. not too worried about the paperwork just the job of sourcing the plates....can anyone recommend a good place to get my plates made up......tvr style

[pmessling]

For the front I made my own. Used a standard size one and cut all the borders down. Think the legal requirement for a standard character is 10mm top and sides

I've got to make another as the one I have the backing is starting to come off.

[FUBAR]

I've always used fancyplates.com but just checked their pricing. £10 for the front plate and £30! for the TVR backlit plate. Greedy farkers.

[spongy]

will check em out bud thanks for the pointer

[FUBAR]

PS they do a 3/4 front plate which aids cooling and looks great on a Cerb

[Supateg]

I have a 3 digit reg so i replaced the front with a cutdown from ebay for £10 (aids cooling and looks good) and got fancy plates on for the rear, yes it is £30 but they provide screws & buttons plus tape.

I bolted a perspex back plate on the front with countersunk stainless bolts to enable me to stick the front plate on and provide a solid base and no visible fixings - very pleased

[Ireland]

Any sign makers will be able to make up a set.

Use transluscent light box material for the back one.

[FarmyardPants]

I used craigsplates.com (under special plates -> TVR plates). 3/4 size for the front, although it's covered with little critter impact craters, maybe I should get a new one