Speed6 soon to go bang?

[anonymous-user]

Only a casual query as I have an AJP, but browsing the 'Bay for bits and saw this Cerb....19k miles, oil at 10psi, water temp seems to be as far north as the needle will go too! Rest of the car looks quite tidy.

Coming from an AJP angle, I'd be stting myself seeing those gauges.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&am...

[Jhonno]

SP6 is dry sump.. So I think 10psi is normal. The temp is not.

[C3BER]

Yes oil fine and gauge shot.

[PuffsBack]

10psi is fine for a Speed6 at idle. Would want to see 40psi at 3000RPM when warm

[PuffsBack]

10psi is fine for a Speed6 at idle. Would want to see 40psi at 3000RPM when warm

My water temp however has never gone above 95

Also - whats that cable in the engine bay?

[anonymous-user]

Cool. I've thought about a Tam at some point in the future, always kinda liked them, so good to get a little info as we go.

[natben]

PuffsBack said:

10psi is fine for a Speed6 at idle. Would want to see 40psi at 3000RPM when warm

My water temp however has never gone above 95

Also - whats that cable in the engine bay?

The cable should go to the air sensor at the back of the front air box the one that stores the air filter. The cable should be cable tied to the silicon water pipe between the engine and the radiator. You will have one on yours but yours will be nice and tidy below the engine cover.

George

[natben]

PuffsBack said:

10psi is fine for a Speed6 at idle. Would want to see 40psi at 3000RPM when warm

My water temp however has never gone above 95

Also - whats that cable in the engine bay?

The cable should go to the air sensor at the back of the front air box the one that stores the air filter. The cable should be cable tied to the silicon water pipe between the engine and the radiator. You will have one on yours but yours will be nice and tidy below the engine cover.

George