Wheelalignment rearwheels

[flyingdutchie]

Got the car back yesterday but the workshop could not adjust one of the rearwheels. It seemed thet the bolt (19mm socket) to adjust the aligment,at the lower wishbone, was stuck in the bush.

Is there a trick to get it going again?

[GT6k]

My approach - Swearing, large hammer, even larger hammer, blow lamp, angle grinder.

When mine was adjusted by Neil Garners they ended up taking the wishbone off the car and heating it up to free it. They had already phoned me to say that if this failed then it would be a new wishbone.

[Mr Cerbera]

Summat subtle like this

[pmessling]

i'm assuming this nut in the photo, worse case, you could cut the adjust off and the rest should be about to be punched out, then just getting the threaded adjuster out.