Hella "Speed Six" article numbers
Discussion
The dips and high beams are just standard 90mm units available from Hella and elsewhere. I think the indicators are Lucas AEU1375. If I was replacing the sidelights I would use DRL LED units as these are common. I have put LEDs sidelight bulbs into both the sidelight units and also extras within the high beams.
I am planning to buy the pods which you can put on without glassing them into the body. These have the main and dipped beam and a little (side?)light. Is it this sidelight you mean? Did you make something yourself with LED's? Or was it of the shelf? I saw you can even buy xenon 90mm lights. Does this require other modifications?
My car had the pods when I bought it, there is a thread from a month or two ago on the different pod types (2,3 and 4 hole types). I have been looking into the idea of going to LED main lights but they are a bit too expensive still.
The sidelights on mine are the small light in the pod, you can also just see the LED sidelight bulb in the main beam (lower) 90mm unit. My plan if I ever have the front re sprayed is to remove the sidelight altogether and just use the auxiliary bulb in the main beam unit.
If I was going to put separate sidelights in I would look at LEDs such as these http://www.carbuildersolutions.com/uk/micro-28mm-w...

The sidelights on mine are the small light in the pod, you can also just see the LED sidelight bulb in the main beam (lower) 90mm unit. My plan if I ever have the front re sprayed is to remove the sidelight altogether and just use the auxiliary bulb in the main beam unit.
If I was going to put separate sidelights in I would look at LEDs such as these http://www.carbuildersolutions.com/uk/micro-28mm-w...
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


