Unhook Handbrake Cable
Discussion
Just put my recon uprights on so nice and fresh from this!
Take the brake drums off, remove the springs and then the shoes, you will see the mech at the top, it hooks the cable, the springs and shoes tensioning it hold the hook in place.
When refitting make sure the shoes pivot from the top against the backplate, not against cable tension,
and adjust from the wheel at the bottom.
I actually have a handbrake that works now!
Take the brake drums off, remove the springs and then the shoes, you will see the mech at the top, it hooks the cable, the springs and shoes tensioning it hold the hook in place.
When refitting make sure the shoes pivot from the top against the backplate, not against cable tension,
and adjust from the wheel at the bottom.
I actually have a handbrake that works now!
Gassing Station | Cerbera | Top of Page | What's New | My Stuff