clutch problems
clutch problems
Author
Discussion

skidoo

Original Poster:

400 posts

213 months

Monday 2nd June 2014
quotequote all
hi all could anyone out there tell me what clutch master cylinder will fit my cerb ,i did hear its from a landrover but the pipe fitting is,nt the same.

billynobrakes

2,675 posts

288 months

Tuesday 3rd June 2014
quotequote all
[quote=skidoo]hi all could anyone out there tell me what clutch master cylinder will fit my cerb ,i did hear its from a landrover but the pipe fitting is,nt the same.

There should be a makers name and part number on it, just google it or take it to a good clutch specialist they should be able to know what it is from

Be careful though I changed mine years ago and the supplier sent me the wrong one it looked exactly the same but was slightly smaller and caused me so many problems and it was not till I took it to a good tvr specialist that they found out what the problem was

jackwibble

664 posts

182 months

Tuesday 3rd June 2014
quotequote all
CLUTCH MASTER CYLINDER
Genric to quite a few vehicles however landrover series three etc etc fits, you just need an adaptor to step up to 7/16 unf for copper pipe and also change the push rod off old cylinder. stock o/e cylinder £30.00 or cheaper (and avoid the brit parts one as apparently they are not much good)

From alternative parts list......http://www.alexjudd.com/cerbera/parts/

Big thanks to Alex clap

jackwibble

664 posts

182 months

Tuesday 3rd June 2014
quotequote all
Get in there with post no 500....... beer


Jhonno

6,430 posts

164 months

Tuesday 3rd June 2014
quotequote all
You need an adapter to fit the Land Rover master..

mattrosersv

579 posts

253 months

Tuesday 3rd June 2014
quotequote all
I used a Land Rover Master with an adapter..

This was covered in a recent topic, details can be found here.

http://pistonheads.com/gassing/topic.asp?h=0&f...

Matt

skidoo

Original Poster:

400 posts

213 months

Tuesday 3rd June 2014
quotequote all
thanks for the responce guys i now know you can fit an adapter ? with the land rover one but what i was getting at is that tvr dont make a unique one so there must be one out there that just fits .the so called specalists wont tell you coz they love to bump the price up but its just a gurling master ....but what is the direct replacment. my quest continues scratchchintype

Mr Cerbera

5,148 posts

253 months

Wednesday 4th June 2014
quotequote all
Clutch Master Cylinders and repair kits are here.

MY '01 4.5 has a Girling G70 fitted (think that's 0.7") which would be the 11/16 bore (but you'd better check my addled-brain maths)

thumbup