Cerbera Interior trim removal
Discussion
If memory serves theres 2 bolts on the passenger side, accessed by removing the passenger footwell upper trim piece and removing the swivel vent, a further 2 bolts on the drivers side, again accessed by removing the trim panel underneath the steering wheel. Finally the helmet holder needs removing. The dash will then be loose but the handbrake lever will need unbolting from the chassis to avoid damaging the console as it comes out.
I've got some pics in my body off guide I didn't take it right out but I think it would have if I wanted it to.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


