rough running hopefully cured
Discussion
I've been chasing this problem for quite a while now and could never get it run how I wanted it to. I could get a nice idle and then it would be rough around 2000rpm, or set it up at 2000rpm and it would stall easily and be hesitant under acceleration.
It has had new coils, plug leads, lambdas and throttle pots so as a last resort I sent my injectors off to be cleaned.
It turned out that I had 1 injector that was partially blocked and therefore under fueling.
After getting it all back together and set up again this afternoon I now have a good idle and after a run out it seams alot smoother on light throttle and it goes better than it ever has done. So fingers crossed I may have this problem sorted.
It has had new coils, plug leads, lambdas and throttle pots so as a last resort I sent my injectors off to be cleaned.
It turned out that I had 1 injector that was partially blocked and therefore under fueling.
After getting it all back together and set up again this afternoon I now have a good idle and after a run out it seams alot smoother on light throttle and it goes better than it ever has done. So fingers crossed I may have this problem sorted.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff