Cerbera rear upright - drivers side - needed please?

[amazon]

It appears that this is rotting on my Cerbera and has a large hole in it :-/. Apparently, this is unheard of as it is one part that was originally over-engineered. The other side is perfect? Odd. Anyway, I am trying to found one, so if anyone has one they'd consider selling please?

Thanks :-)

[TvrJohn]

try douglas valley breakers

[billybradshaw]

TvrJohn said:

try douglas valley breakers

I drive by this breakers yard almost every day and they have at least one Cerbera on it's racks that I can see from the road. I think it still has it's wheels on and therefore, the upright must be there too.

HTH

Ian

[pmessling]

I might have one. I do have a spare can't remember if it's drivers or passengers. I will take a look for you b

[amazon]

pmessling said:

I might have one. I do have a spare can't remember if it's drivers or passengers. I will take a look for you b

Thank you very much

[amazon]

That's impressive - enquiry, suggestion and almost a stock check - marvellous! Thanks boys .

[pmessling]

Just checked and it's a passenger side unfortunately. Why can't you weld the hole up or weld a plate on top?

[Gazzab]

Just drive it to Chatsworth. Make sure it breaks in the car park. I'll go and get a trolley jack and someone else will go and find one for you and help fit it there and then ;-)

[amazon]

Gazzab said:

Just drive it to Chatsworth. Make sure it breaks in the car park. I'll go and get a trolley jack and someone else will go and find one for you and help fit it there and then ;-)

I was talking about that 'event' just the other night!

Didn't know it could work twice

[amazon]

pmessling said:

Just checked and it's a passenger side unfortunately. Why can't you weld the hole up or weld a plate on top?

Thank you looking .

This might be a possibility - I think the immediate reaction was that I should just try and source another. If that turns out to be a real problem, then needs must.

I would prefer to replace it, given that they don't usually rot, the other side is perfect, so it's clearly a duff one. (Female logic)

[Gazzab]

might engineer1949 have some parts....?
http://www.pistonheads.com/gassing/topic.asp?h=0&a...

[amazon]

Gazzab said:

might engineer1949 have some parts....?
http://www.pistonheads.com/gassing/topic.asp?h=0&a...

Thanks Gazzab.

[m60ddy]

amazon said:

Gazzab said:

Just drive it to Chatsworth. Make sure it breaks in the car park. I'll go and get a trolley jack and someone else will go and find one for you and help fit it there and then ;-)

I was talking about that 'event' just the other night!

Didn't know it could work twice

Strange..... Very strange. I was talking to someone about this story the other day too??!!

[amazon]

m60ddy said:

amazon said:

Gazzab said:

Just drive it to Chatsworth. Make sure it breaks in the car park. I'll go and get a trolley jack and someone else will go and find one for you and help fit it there and then ;-)

I was talking about that 'event' just the other night!

Didn't know it could work twice

Strange..... Very strange. I was talking to someone about this story the other day too??!!

You too?

[amazon]

I haven't managed to actually get my hands on the correct upright yet, I'm just bumping this in case someone has come across one (she asks hopefully!) please?

As of next week, I am going to have a rare three wheeled Cerbera and I'm not sure that it will very desirable.

Any ideas would be appreciated, thank you .

[pmessling]

How about using a Tuscans. Take the brake caliper mount off and weld the cerberas one on. Even if a fab shop had to make a new brake caliper mount it's only a piece of flat bar with tapped holes in it.

[amazon]

pmessling said:

How about using a Tuscans. Take the brake caliper mount off and weld the cerberas one on. Even if a fab shop had to make a new brake caliper mount it's only a piece of flat bar with tapped holes in it.

Thanks for your idea Peter . I phoned the breakers again and managed to find one this time!!

It all starts tomorrow

[jeremyc]

amazon said:

It all starts tomorrow

[gruffalo]

amazon said:

pmessling said:

How about using a Tuscans. Take the brake caliper mount off and weld the cerberas one on. Even if a fab shop had to make a new brake caliper mount it's only a piece of flat bar with tapped holes in it.

Thanks for your idea Peter . I phoned the breakers again and managed to find one this time!!

It all starts tomorrow

Fancy tea and cake at the Ace once you have it back together, haven't seen you for ages?

[Shanksy87]

RT Racing should be able to repair your current hub. Give Richard a call, he seemed confident most were recoverable when he did mine.