missing diagnostic screens

[redbraveheart]

Hi
Can anyone help as i seem to be missing screens 2-3 & 4 on tvr diagnostics i have managed to get my rebuit speed six up and running as i have the engine screen one plus live screens but can not find the other three
Not sure if its missing files [did the renaming thing and that got me the engine screen] tried the page up / down arrows on the key board etc
Am no computer geek as you can tell !!
Any help advice would be great
phil

[Gazzab]

I recall having a similar issue many years ago. I recall there being 2 versions of the software..? One with a yellow car and one with a blue car...? I had the 'wrong' version I think. I might have dreamt this though as it was 14 years ago.

[EvoOlli]

Maybe you could give this a try:

www.pistonheads.com/gassing/topic.asp?h=0&f=15...

[redbraveheart]

cheers lads for the responce
i have the yellow car version of soft ware and can not open the link to Version 0.95 from 12.January 2014:
www.wiechens.de/mbetool/mbetool.zip
Adope says unable to open
Any ideas ?

[Tanguero]

redbraveheart said:

Hi

Not sure if its missing files [did the renaming thing and that got me the engine screen] tried the page up / down arrows on the key board etc

It uses the "PgUp" and "PgDn" keys rather than the arrow keys.

[ukdj]

redbraveheart said:

cheers lads for the responce
i have the yellow car version of soft ware and can not open the link to Version 0.95 from 12.January 2014:
www.wiechens.de/mbetool/mbetool.zip
Adope says unable to open
Any ideas ?

I have downloaded and opened/run the file from your link without issue, I wouldn't of expected adobe to be involved in the process as it is a zip file containing a txt file and an exe.

Try right clicking the link and "save link as" to download the file, then use something like winzip/winrar to open it

Shout if you need further help ...

[EvoOlli]

It seems that your OS can't open the ZIP-File. Try to install 7-ZIP ( www.7-zip.org) to open the mbetool.zip.

[redbraveheart]

Found them woop woop ya stars [one admin girl,i guy who works on turbines,me and another never used page up / down on the key board !!]
will also sort the download out for the other soft ware as looks a handy thing to have.
I have just fitted a new lambda to 456 as found that was bad [done 1000mls at the most]
Balanced the throtle bodies resetting the addaptives and throtle everytime i ajusted the bodie and they are all at 6 kg/min within .5kg/min of each other tickover 950ish
Both AFR are bad
addaptive 1 23.1
addaptive 2 -23.1
no point going for the Mot just yet !!

[CerbWill]

One bank on max adaptive and the other on minimum usually means the lambdas are plugged in the wrong way round.