Front caliper mounting bolts
Discussion
According to this chart you'll get 26mm of thread on a 60mm bolt, so a 34mm shank?
some vehicle manufacturers have special bolts made for things like calipers and propshafts with non standard ratio of thread to shank.
phillpot said:
According to this chart you'll get 26mm of thread on a 60mm bolt, so a 34mm shank?
some vehicle manufacturers have special bolts made for things like calipers and propshafts with non standard ratio of thread to shank.
Thanks for that. In the unlikely event that TVR have used a standard I guess the best way is to measure the depth of the body of the caliper and go from there.some vehicle manufacturers have special bolts made for things like calipers and propshafts with non standard ratio of thread to shank.
Cheers
Ian
Gassing Station | Cerbera | Top of Page | What's New | My Stuff