Electrical Control units in the boot

[roseytvr]

96 4.2 AJP

I have 6 of these fitted above the fuel tank. I am doing a full nut and bolt rebuild and I am not sure what two of them are. So in order from near side to off side I have:

Ignition Control
Indicator and hazard lamps
Light switching
Automedan
Unmarked box
Dim/Dip switching

Any ideas what the Automedan box does, it is dated later than the year of manufacture but cabling looks OEM. Also the unmarked box, any ideas again cabling looks OEM.

Thanks
Ian

[gruffalo]

door and window control box should be up there with 4 connectors on of which while being something like a 10 way connector only has 3 wires going to it.

The other could be the immobiliser.

Edited by gruffalo on Monday 4th April 22:09

[tofts]

As follows,

Automedan - Almost certainly your Window control, 4 plugs, one of which only has 2 thin wires (black, red) in it

Unmarked box - Will have 6 wires coming from it on spade terminals most probably, has a kind of aluminium ish bracket unlike the other boxes. It is the PWM drive for dim dip

The immobiliser and alarm are not in the boot unless its an after market affair.

Edited by tofts on Tuesday 5th April 09:49

[Byker28i]

http://www.pbase.com/byker28i/tvr&page=all

Look here - I made photos of mine in order from left to right

[roseytvr]

Thanks for the responses guys. Exactly as described, problem solved.
Cheers