cerberas in France ?

[DBSV8]

The initial message was deleted from this topic on 24 November 2010 at 06:35

[zorglub]

Hello David,
There are 3 cerbs of my knowledge in France, 2 in the west side, one (mine) in the south.
Where will you be staying ?
Nick

[tvrinbfg]

There are a couple of Cerberas in Belgium too; and Marc Minnie is in Gent (B), circa 60/70 miles north of Calais for servcing, so you could take it there rather than back to UK.

[SlvrCrb]

DBSV8 said:

I am in Brittany near Pontivy

I'll be about 20kms away from Pontivy later this month, visiting my in-laws in San Guen, (Near Loudeac/Mur De B).

My wife is from Brittany and we go there about 2-3 times a year. Have to agree the roads are just SUPERB, lovely and clear (apart from the odd tractor) and NO TOLLS. I'm leaving the UK on the 19th and going to

Calais>Compiegne>Beauvais>Paris>Nantes>Rennes>San Guen>Caen

Should be getting to Brittany around the 25th for 4-5 days. Will you be in Pontivy then? If so I could shoot over and wake up the locals :-)

Only 2 weeks to go

[SlvrCrb]

Thanks for the Ferry crossing link, will check it out next time.

It's a shame you'll be away, but we do come out to Brittany fairly regularly so maybe later in the year we could hook up for a and a

Rob

[erikje]

For the car service i'ts in Belgium
9810 Nazareth(Deinze)
Dealer for belgium and france

[GCerbera]

I'm taking mine to Verviers in Belgium end of next week as I have to see a band.

Very close to Spa, so I'll check that out, any other tracks or places worth
looking at between Boulogne and Verviers?

[jurdy]

Sold my Silver 4.5 to a very nice French chap who lives near Biarritz. Active member of the TVRCC there who left my house with a vey large grin on his face about two years ago.

[zorglub]

Hi all
I took my yellow one at Marc Minne's who is really in love with TVR. I spent (and still spending ) a lot of time with him on the phone as I have some little troubles ( cluch, oil leak, 7 cylinders only working...) he is always answering.
In the south east,I have a nice chap who make Morgan also, he would want to be TVR certified does someone know how to do that ?

Thank

Nick