Flexible fuel lines - where to get them?
Discussion
I'm looking at changing the flexible fuel lines on my car again (I changed them a few years ago after a small leak that happened while I was in my own yard and now I'm afraid to let them get old and perished for fear of them failing while I'm driving) and I'm wondering where people are getting their hoses from these days.
Last time I got 8mm ID fuel line from a local auto factors and was never fully happy with the hose they got me.
It was the type with the thread-type braiding on the outside of a rubber-type hose and while it was rated correctly for the pressure, etc I never felt that the thread braiding offered any sort of protection if the hose rubbed off some part of the body / engine, always felt it could wear through it very easily.
This time I'm after something better.
Any suggestions folks ?
I remember this topic being discussed on here some years ago (I probably even contributed to it myself) but I've tried the search and can't find it
.
Last time I got 8mm ID fuel line from a local auto factors and was never fully happy with the hose they got me.
It was the type with the thread-type braiding on the outside of a rubber-type hose and while it was rated correctly for the pressure, etc I never felt that the thread braiding offered any sort of protection if the hose rubbed off some part of the body / engine, always felt it could wear through it very easily.
This time I'm after something better.
Any suggestions folks ?
I remember this topic being discussed on here some years ago (I probably even contributed to it myself) but I've tried the search and can't find it
.Racetech Direct:-
"L0182
TVR Hose Fuel Feed / Return 8mm
Original Equipment
TVR Fuel hose for feed and return. Internal diameter 8mm. Used on most TVR models. High temp double wall for all unleaded fuels . Braided doubled walled Marine Spec 150psi , Sold per meter.
On Offer £7.95 ex VAT"
HTH,
"L0182
TVR Hose Fuel Feed / Return 8mm
Original Equipment
TVR Fuel hose for feed and return. Internal diameter 8mm. Used on most TVR models. High temp double wall for all unleaded fuels . Braided doubled walled Marine Spec 150psi , Sold per meter.
On Offer £7.95 ex VAT"
HTH,

Please also be aware of this, it's a sticky on the Chimp forum but should be on all forums IMHO:
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
I'm in the process of replacing all of mine at the moment with AN6 connectors and braided hose
There's lots of details, pictures and parts etc in this thread
HTH
There's lots of details, pictures and parts etc in this thread
HTH
Hello,
Try this thread:
http://www.pistonheads.com/gassing/topic.asp?t=155...
I posted it a good while ago but can probably still remember what I did if you have any questions. etc.
Hope it helps
Ian
Try this thread:
http://www.pistonheads.com/gassing/topic.asp?t=155...
I posted it a good while ago but can probably still remember what I did if you have any questions. etc.
Hope it helps
Ian
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


