Cerbera Chassis Length
Discussion
I've been searching various threads on here to see if anyone had put a length of the chassis from front to back - but I can't find a post with measurements on - could someone tell me what the length of the chassis is from front to back please, as I want to see if it will fit in a transit van which has an internal load space of 2512mm - so need to know if it will fit in or whether I'll need a long wheelbase, we're taking it for blasting.
Thanks a lot.
Thanks a lot.
It won't fit - I'll measure it tonight. I think 3165 is about right though.
I ratchet strapped the doors and had a high vis cloth for a flag for the overhang out of the back of a normal Renault van. I put it in nose first so as the doors could close a bit more due to the rear being thinner at the back. Google convinced me that this was legally fine, and driving along the heavily camera covered M6 past Birmingham twice, I wasn't interrupted in my business.
Here's what I used to justify my actions (Click)
I ratchet strapped the doors and had a high vis cloth for a flag for the overhang out of the back of a normal Renault van. I put it in nose first so as the doors could close a bit more due to the rear being thinner at the back. Google convinced me that this was legally fine, and driving along the heavily camera covered M6 past Birmingham twice, I wasn't interrupted in my business.
Here's what I used to justify my actions (Click)
Gassing Station | Cerbera | Top of Page | What's New | My Stuff