Lazy Speedo Problem
Discussion
Actually it's not too bad, crawl underneath or remove the wheel to access. Sensor is mounted on a bracket behind the inner CV joint (on the nearside IIRC), look for the toothed wheel inboard of the CV joint. Sensor gap may be too excessive or wiring contacts corroded.
Still could be the speedo but the sensor is a little easier to access and, as it's exposed to road dirt etc, a good place to start looking for the problem.
My sensor went intermittant before failing altogether.
Still could be the speedo but the sensor is a little easier to access and, as it's exposed to road dirt etc, a good place to start looking for the problem.
My sensor went intermittant before failing altogether.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


