Bodywork adhesive & sealant

[dazbod]

I’m fitting clear lens front indicators to fill the holes left when the front lights where upgraded to Speed 12 lights.

Could anyone please tell me what type of glue is suitable to fix the front indicator housing into the bodywork’s front valence and the sealant used to seal the front light access plate in the inner front wings.

[Big Al.]

SIKAFLEX OH

Not from Halfrauds, someone like Partco etc.

[andy4200]

Balls to the fake clear indicators, put a piece of black mesh in there instead.
Who done the light upgrade? they should have sorted that out at the same time....

[jesfirth]

go with andy's recommendation and then cut a hole in the inner wheel arch and run vents to the front brake disks

[dazbod]

andy4200 said:

Balls to the fake clear indicators, put a piece of black mesh in there instead. Who done the light upgrade? they should have sorted that out at the same time....

[dazbod]

andy4200 said:

Balls to the fake clear indicators, put a piece of black mesh in there instead. Who done the light upgrade? they should have sorted that out at the same time....

The light upgrade was done before I purchased the car but was done by TVR body shop I think. The original amber indicators were also missing when I purchased the car. I purchased from ebay the complete clear indicator assembly simply to fill the holes. I had intended fitting aftermarket fog lights but failed to find anything suitable.

[dazbod]

Big Al. said:

SIKAFLEX OH Not from Halfrauds, someone like Partco etc.

Thanks for the info.