Phone holder for Cerbera
Discussion
Hi folks
I recently got a new holder for my phone and it works brilliantly so thought I would share it in case anyone else has struggled to find somewhere to mount their phone in the cerb.
In the past I’ve struggled to fit a phone in a convenient location because:
- a sucker uses up too much precious screen real estate, unless mounted high up, but:
- having the phone near the rollbar is too close for me to see these days without reading glasses
- the rest of the dash is too curvy and being leather(ish) combined with acceleration forces, sticky pad solutions don’t work.
- there are no slatted air vents
- having it in the cubby hole takes my eyes off the road too much
I attach this one to the lip above the stereo which puts it in a very convenient spot. There is just enough of a lip for it to hold onto. It could also probably grab the big upper lip that spans the whole dash. It will also grab the rollbar, if mounted upside down, on the mk II models (with the small rollbar/Tuscan seats) if your eyesight is better than mine
Finally, you could mount it above the instrument binnacle but it might block your view somewhat.
https://www.amazon.co.uk/Modohe-Design-Universal-H...
Edit: will post a photo
I recently got a new holder for my phone and it works brilliantly so thought I would share it in case anyone else has struggled to find somewhere to mount their phone in the cerb.
In the past I’ve struggled to fit a phone in a convenient location because:
- a sucker uses up too much precious screen real estate, unless mounted high up, but:
- having the phone near the rollbar is too close for me to see these days without reading glasses

- the rest of the dash is too curvy and being leather(ish) combined with acceleration forces, sticky pad solutions don’t work.
- there are no slatted air vents
- having it in the cubby hole takes my eyes off the road too much
I attach this one to the lip above the stereo which puts it in a very convenient spot. There is just enough of a lip for it to hold onto. It could also probably grab the big upper lip that spans the whole dash. It will also grab the rollbar, if mounted upside down, on the mk II models (with the small rollbar/Tuscan seats) if your eyesight is better than mine

Finally, you could mount it above the instrument binnacle but it might block your view somewhat.
https://www.amazon.co.uk/Modohe-Design-Universal-H...
Edit: will post a photo
Edited by FarmyardPants on Wednesday 24th April 00:06
Thank you for sharing - I have been using a suction mount somewhat unsuccessfully (lost track of how many times it has come un-stuck which is not the safest when driving). Quite cheap really so I'll probably get one.
One question - any damage to the leather/vinyl? (I recall that the upper part of the dash this would fix onto is vinyl made to imitate the leather on the lower part if memory serves...).
Ta!
One question - any damage to the leather/vinyl? (I recall that the upper part of the dash this would fix onto is vinyl made to imitate the leather on the lower part if memory serves...).
Ta!
Gassing Station | Cerbera | Top of Page | What's New | My Stuff



