Aarrgghhh " Help with Steering Wheel wiring needed !
Discussion
Hi Y'All,
Big problem with the Steering Colmn Cabling, behind the wheel.
I have become confused with, what-goes-where, with the 10-line cables.
There is a socket at the bottom of the Steering Column housing.
There is a socket (alongside the smaller socket) on the "Steering Wheel functions Control Unit" Box
and on top of the Steering Column PCB there are 2, 10-line sockets.
Does anyone have any idea which cable end fits into which socket ??
Ta !
PJ
Big problem with the Steering Colmn Cabling, behind the wheel.
I have become confused with, what-goes-where, with the 10-line cables.
There is a socket at the bottom of the Steering Column housing.
There is a socket (alongside the smaller socket) on the "Steering Wheel functions Control Unit" Box
and on top of the Steering Column PCB there are 2, 10-line sockets.
Does anyone have any idea which cable end fits into which socket ??
Ta !
PJ
Rather than words, try this thread. Lots of pictures
https://www.pistonheads.com/gassing/topic.asp?h=0&...
https://www.pistonheads.com/gassing/topic.asp?h=0&...
Cheers Dave
You've saved me again
Think I should invest my money in a Brewery, looking at all the Beers I'm gonna owe You
_______________________________________________________________________________________
To sumarise for others, who may be as lost as I am, if I may, Big G's post....
The top, 10-line rail, of the Steering Colmn PCB is for Indicators/Hazards
Therefore the whole path that the signal takes is
from steering buttons,
.....to Steering boss,
..........to ribbon, to another ribbon
....................to steering wheel ecu/indicator cancellation (Sensors located on PCB),
..............................to steering wheel ecu box (Steering Wheel Functions Control Unit)
This leaves the bottom, 10-line rail (of the Steering Column PCB) to connect to the plug below the Steering Column (above the A/C Vent - Or, in my case, the Oil Temp Guage)
Simples
HTH
You've saved me again
Think I should invest my money in a Brewery, looking at all the Beers I'm gonna owe You
_______________________________________________________________________________________
To sumarise for others, who may be as lost as I am, if I may, Big G's post....
The top, 10-line rail, of the Steering Colmn PCB is for Indicators/Hazards
Therefore the whole path that the signal takes is
from steering buttons,
.....to Steering boss,
..........to ribbon, to another ribbon
....................to steering wheel ecu/indicator cancellation (Sensors located on PCB),
..............................to steering wheel ecu box (Steering Wheel Functions Control Unit)
This leaves the bottom, 10-line rail (of the Steering Column PCB) to connect to the plug below the Steering Column (above the A/C Vent - Or, in my case, the Oil Temp Guage)
Simples
HTH
Edited by Mr Cerbera on Tuesday 16th June 15:41
Gassing Station | Cerbera | Top of Page | What's New | My Stuff