Door window seal and brush

[GermanCerb]

Hi all,

I'm wondering if it's correct that the rubber seal is inside the car (on the door card) and the brush outside (on the door itself)?
I put it together like this after my body-off after comparing to a friends Cerbera doors because I forgot to do photos of that.
From my point of view it's a bit senseless to do it like this. And on the weekend I could see that on other TVR models it is as you would expect: rubber outside and brush inside. Racetech also says V0170 TVR Door Window Seal Outer
So please - what is correct?

And btw: Where is this seal used: U0399 Door Glass Rubber Felt TVR?

Cheers
Michael

[phillpot]

GermanCerb said:

Hi all,



And btw: Where is this seal used: U0399 Door Glass Rubber Felt TVR?

Cheers
Michael

That is what the glass slides up and down in. The felt wears off then the glass is trying to slide in rubber. One of the reasons for slow windows

[GermanCerb]

Does nobody have an idea or can check where the seal is on your door and where the brush is (inside/outside)?
Not clear what I'm talking about? Then probably I should take a photo on the weekend.

Cheers
Michael

[jong1e]

photo would be good.... i have brush on the outside and rubber on the inside and its cack!! and doesn't look right

[GermanCerb]

The same but seems to be correct...





The brush is riveted to the door because there are the fixation points and the seal is inside between window and door card. Strange decision. Instead of keeping the water outside they invited it to come in (into the door at least).
OK, doesn't matter - problem "solved".

Thanks and cheers
Michael